Showing posts sorted by relevance for query New Caledonia. Sort by date Show all posts
Showing posts sorted by relevance for query New Caledonia. Sort by date Show all posts

New Caledonia Nickel Supply Gains Time, Not Certainty

No comments
New Caledonia Nickel Supply Gains Time, Not Certainty
Eramet

New Caledonia nickel supply has moved from crisis toward cautious stabilisation. SLN nickel stabilisation followed fresh state-backed funding and renewed guarantees from Eramet. However, the company has not returned to normal operations. Therefore, New Caledonia nickel supply remains fragile despite short-term relief.

SLN’s restart plan shows progress, but recovery will be slow. Thio, Kouaoua, and Poro are reopening after long disruption. Doniambo is still running at minimum technical capacity. Meanwhile, Poum remains shut until nickel prices improve. That means operational stabilisation does not yet equal strategic recovery.

SLN Nickel Stabilisation Depends on Funding, Grades, and Energy Costs

SLN nickel stabilisation now rests on financial support rather than market strength. A €240mn state-backed bond facility secured operations through 2026. The first tranche already arrived in late December. A second tranche is expected between April and August. As a result, SLN has bought time, not solved its structural weakness.

Ore grade improvement has become the main lever for margin recovery. SLN plans to raise average ore grade to 2.25pc in 2026. That compares with 2.1pc in 2025. Management believes each 0.1-point gain lifts ebitda materially. However, stronger grades cannot remove the energy cost burden.

Energy remains the core competitive problem for New Caledonia nickel supply. SLN still faces structurally high power costs. Indonesian nickel producers operate with lower energy and processing costs. Therefore, SLN remains exposed even if production and grades improve. Profitability targets for 2029-30 still look distant.

Non-Indonesian Nickel Supply Matters More Than Its Volume Suggests

Non-Indonesian nickel supply remains strategically important despite small tonnage. SLN’s ferro-nickel output rose to about 36,000t in 2025. Its 2026 target stands at 43,000t. Those volumes are modest globally. However, they matter for Pacific balance and diversified alloy supply chains.

The broader nickel market still looks oversupplied, but that headline hides deeper risk. High-cost producers outside Indonesia now survive mainly through public support. They cannot respond flexibly to future demand changes. Consequently, the market may face sharper disruptions in later cycles.

The Metalnomist Commentary

SLN’s stabilisation shows that non-Indonesian nickel supply now depends as much on policy as on geology. Global nickel oversupply has not removed strategic fragility. It has simply shifted the burden onto governments supporting diversity outside Indonesia.

Eramet's Nickel Production Faces Mixed Results in Second Quarter

No comments

In the second quarter, French mining giant Eramet experienced mixed results in its nickel and nickel ore production, with notable differences between its operations in Indonesia and New Caledonia. Improved productivity led to a rise in output at Weda Bay, Indonesia, while socio-political disturbances in New Caledonia caused significant declines.

Eramet's high-grade nickel ore production at Weda Bay surged by 56% to 5.913 million tonnes in the second quarter, maintaining the same growth rate in the first half of the year with a total production of 12.255 million tonnes. This increase was driven by an effective mining plan that improved the grade of marketable ore and enhanced inventory management.

Conversely, the production of low-grade nickel ferroalloys fell by 17% to 6,600 tonnes in nickel metal content, with a January-June output decline of 11% to 14,000 tonnes. This reduction was due to slowed production from one furnace in the first quarter and scheduled maintenance during the second quarter.

In New Caledonia, Eramet's subsidiary, Societe Le Nickel (SLN), saw a dramatic 73% year-on-year decline in nickel ore production to 389,000 tonnes in the second quarter. This was caused by a halt in mine production across the French-controlled territory due to safety concerns following violent outbreaks that damaged buildings and infrastructure, particularly affecting the Thio and Kouaoua sites. SLN's first-half ore output fell by more than half to 1.403 million tonnes.

Ferronickel production at SLN also dropped by 14% year-on-year in the first half of the year to 17,400 tonnes, hindered by reduced activities at the Doniambo plant. Violence in New Caledonia created difficulties in transporting nickel ore and other essential inputs to the plant.

Due to these challenges, Eramet revised its 2024 external ore sales target from 42 million wet metric tonnes (wmt) to 40 million wmt, as the government did not grant the permit for low-grade saprolite sales.

SLN's financial situation in New Caledonia remains "extremely critical," with most mines suspended since mid-April and the Doniambo plant operating on minimal technical power. Eramet has decided not to provide further financing to SLN but continues to support its operations. In line with an agreement signed in April between Eramet and the French government, France issued €80 million in funding to SLN in July, providing essential support for its ongoing operations.

Glencore’s Metals Output Declines in 2Q

No comments

Switzerland-based mining firm Glencore's base metals production fell on the year in the second quarter, with copper, zinc, and nickel all registering declines. Its copper production was marred by lower grades from some historical stock depletion and unplanned mill downtime at its African assets, with a geotechnical event and subsequent mine stabilisation activities at the Antapaccay site affecting output in South America.

Glencore's copper output fell by 9% on the year to 222,900 tons during April-June, with its Mutanda asset registering a steep 27% drop in copper metal output to 7,100 tons. Copper in concentrates production at Antapaccay shed 42% to 26,500 tons.

The group's January-June copper output fell by 5% year on year to 462,600 tons. But Glencore expects to recoup its losses in the second half of the year and left its annual production guidance for copper unchanged at 950,000-1.01 million tons.

Glencore's second-quarter zinc output fell by 8% on the year to 211,600 tons. Volumes were lower from Antamina given its expected copper/zinc mine sequence this year, but the drop was partially offset by the ramp-up of Zhairem. The group's January-June zinc output fell by 4% on the year to 417,200 tons.

Glencore's nickel output suffered a heavy fall on the transition of its New Caledonia operations into care and maintenance. But the drop was partially offset by recovery at its Sudbury Integrated Nickel Operations in Canada, together with higher production at Murrin Murrin in Australia.

Glencore's nickel output fell by 20% year on year to 20,400 tons in the second quarter, with January-June output registering a 5% fall to 44,200 tons. The drop was the result of its Koniambo operations in New Caledonia ceasing operations, going from an output of 7,700 tons of nickel in ferronickel in the second quarter of 2023 to zero this year.

Glencore's annual production guidance for nickel and zinc was unchanged at 80,000-90,000 tons and 900,000-950,000 tons, respectively.

The group's ferrochrome output fell by 16% on the year to 599,000 tons during January-June owing to the Rustenburg smelter's continued idled status in response to weak market conditions. A restart was pending an improved price and cost environment, the group said.

Glencore's cobalt production also fell by 27% year on year to 15,900 tons in the first half, attributed to lower run rates at Mutanda in response to a weak cobalt pricing environment, together with lower throughput and cobalt grades at the KCC asset.

Chinese Firms Intensify Investments in Cu-Co Mining in the Democratic Republic of Congo

No comments

In a strategic maneuver to secure a steady supply of crucial resources, Chinese enterprises are significantly amplifying their investments in the copper-cobalt reserves of the Democratic Republic of Congo (DRC). This initiative addresses China's limited cobalt resources and the enduringly strong copper market.

Leading the charge are prominent entities such as diversified metals producer CMOC, China Railways Resources, China Nonferrous Metal Mining, Norin Mining, Excellent Mining, and Huayou Cobalt. According to data compiled by Metalnomist, the DRC produced approximately 167,000 metric tons of cobalt feedstock in 2023, with Chinese mining companies contributing around 59% of this total output. Presently, Chinese investments account for over 62% of the DRC’s total cobalt reserves, a remarkable increase from roughly 25% in 2016. This proportion is anticipated to expand further following Norin Mining's acquisition of Dubai-based Chemaf Resources (CRL).

China’s dependency on imported cobalt, which constitutes nearly 99% of its primary feedstock, has propelled these extensive investments. The DRC remains the foremost supplier of cobalt feedstock to China, accounting for 84% of China's total imports in 2023, trailed by Indonesia (10%), Papua New Guinea (1.6%), and New Caledonia (1.5%).

This domestic resource shortfall has driven Chinese mining firms to intensify their investments in the DRC’s copper and cobalt assets over recent years. CMOC, a global titan in mining cobalt, copper, tungsten, molybdenum, and niobium with operations spanning China, the DRC, Australia, and Brazil, acquired a 56% stake in the Tenke Fungurume copper-cobalt mine (TFM) from US-based Freeport-McMoRan in 2016, later increasing its stake to 80% in 2017. Additionally, CMOC finalized its acquisition of the Kisanfu copper-cobalt mine (KFM) in December 2020.

With copper prices maintaining an upward trajectory since early this year, achieving new heights on the Shanghai Futures Exchange (SHFE) and London Metals Exchange (LME) in mid-May, mining firms have been further incentivized to augment their investments in the DRC’s copper-cobalt mines.

Norin Mining's acquisition of CRL, which controls two copper-cobalt mines in the DRC, underscores this trend. Norin Mining Kingco, a wholly-owned subsidiary of Norin Mining, has entered into a share purchase agreement with CRL’s parent company Chemaf to acquire all of Chemaf's shares in CRL. The financial details of the transaction remain undisclosed, yet CRL anticipates completing the deal in the fourth quarter of 2024.

Nevertheless, the state mining company Gecamines has expressed opposition to the sale of Chemaf Resources, potentially delaying the acquisition process. A source familiar with the matter noted, "The acquisition is expected to be delayed for a while because of Gecamines' opposition, but it will probably be resolved later without significantly impacting the acquisition."

Chemaf SA is progressing with the expansion of the Etoile mine (Etoile phase 2) to process mixed and sulphide ore, alongside developing a new Mutoshi mine. Both projects, in advanced stages of development, have the potential to collectively produce over 75,000 metric tons of copper and 20,000 metric tons of cobalt hydroxide annually. These new ventures are expected to commence production in 2025, post-acquisition.

China’s Nickel Sulphate Prices Rise as Producers Struggle with Mounting Losses

No comments
China’s Nickel Sulphate

Chinese nickel sulphate producers increased prices following the Golden Week holiday to offset growing losses, as raw material prices for class 1 nickel and mixed hydroxide precipitate (MHP) rose. On October 10, these producers reported a nearly 2,000 yuan per tonne ($283/t) loss, up from a 500 yuan loss before the holiday, driven by international nickel and MHP price hikes.

Following these losses, producers raised nickel sulphate offers by around 1,000 yuan to reach 27,800-28,200 yuan per tonne on October 11, up from 26,800-27,200 yuan before the holiday. Despite this increase, market activity remains low due to ample inventory and a declining outlook in the electric vehicle (EV) sector, particularly in the fourth quarter.

Limited Demand Despite Supply Adjustments

Nickel sulphate is vital for the production of batteries in the EV industry, which comprises nearly all battery demand in China. However, weak downstream interest has dampened pricing, as cathode active material (CAM) prices, specifically nickel-cobalt-manganese (NCM), have remained stable post-holiday. Many suppliers, seeking to avoid further price drops, are destocking their inventories, further affecting demand.

The country imported 122,272 tonnes of MHP and 68,227 tonnes of nickel matte in August, primarily from Australia, Papua New Guinea, Indonesia, and New Caledonia. While many sulphate producers continued output to retain market share, low profitability has forced others to delay new projects, including planned expansions in Guangxi and Guizhou.

Recent data from the China Automotive Battery Innovation Alliance show that newly installed power-battery volumes rose by 33% year-on-year to 292.1GWh from January to August. However, nickel sulphate output held steady at around 380,000 tonnes, indicating that destocking and overstocking issues from previous years continue to impact the industry. "We aren’t seeing significant demand growth due to ongoing destocking efforts after EV producers overestimated their needs in 2021-22," noted an NCM CAM producer.

Record Highs in China's Ferro-Nickel Imports Amid Booming Stainless Steel Industry in 2024

No comments
Ferro-Nickel

Surging Demand Drives Unprecedented Import Volumes

In 2024, China's ferro-nickel imports reached a new record, driven by robust demand from its stainless steel mills and alloy producers, particularly those with operations in Indonesia. The total import volume surged to 8.98 million tons, marking a 6.2% increase from the previous year. A significant portion of these imports, amounting to 8.67 million tons, came from Indonesia, reflecting a 9.5% rise over the period.

Indonesian Production Boom Fuels Export Growth

The surge in imports from Indonesia is attributed to new production capacities at companies like Lygend, Nadesico Nickel Industry (NNI), and Shuoshi. These firms have effectively compensated for reduced shipments from other countries such as New Caledonia, Colombia, and Brazil, which saw declines in their export volumes to China by 27%, 0.9%, and 36% respectively.

Strategic Expansion and Technological Advancements in Nickel Production

The expansion in Indonesia includes significant developments like Shuoshi's commissioning of 12 Rotary Kiln Electric Furnaces (RKEF) and NNI's ongoing project, which involves six of eight planned RKEF lines. Moreover, Ningbo Lygend's nickel pig iron (NPI) project showcases substantial production, with its subsidiary HJF already at full capacity since August 2023, and its second phase under construction aiming for completion by 2026. NPI, with its high nickel content, remains crucial for stainless steel manufacturing, underscoring the strategic importance of these expansions.

Indonesia Nickel Ore Quotas Risk Tightening Feedstock Without Fixing Oversupply

No comments
Indonesia Nickel Ore Quotas Risk Tightening Feedstock Without Fixing Oversupply
Indonesia Nickel

Indonesia nickel ore quotas are becoming a more powerful market signal in 2026. Jakarta is expected to cut RKAB approvals to around 250mn–260mn t. That looks like a strong intervention on paper. However, Indonesia nickel ore quotas may tighten feedstock without solving Indonesian nickel oversupply in downstream products.

The core imbalance is no longer in ore. The real surplus sits in nickel pig iron, matte, and mixed hydroxide precipitate. Domestic ore prices remain elevated, which suggests ore availability is still tight. Therefore, Indonesia nickel ore quotas may create upstream stress while leaving downstream nickel products oversupplied.

This matters because policy and market structure are moving in opposite directions. Indonesia continues to expand smelting and HPAL capacity aggressively. At the same time, ore quotas are becoming harder to secure in full. As a result, the market may move toward feedstock shortages rather than a true rebalancing of refined nickel supply.

Indonesia Nickel Ore Quotas Could Create an Upstream Bottleneck

Indonesia nickel ore quotas appear lower than expected ore demand for 2026. The approved ceiling now looks below estimated domestic ore requirements. That gap raises the risk of feedstock shortages for smelters. Consequently, nickel ore supply tightness may become the market’s next major problem.

Vale Indonesia shows how this pressure is already emerging. Market participants say its approved RKAB is only a fraction of requested volume. Yet the company is developing multiple HPAL projects that will require large limonite ore volumes. Therefore, limited quota approvals could constrain new downstream capacity before it reaches full utilisation.

The ore issue is also more complex than headline tonnage suggests. RKAB quotas are issued in wet tons, not uniform recoverable nickel units. Moisture content and ore grade can vary significantly. As a result, nominal quota levels may overstate real usable feedstock availability.

Regulatory uncertainty adds another layer of risk. Indonesia’s forestry crackdown has targeted a large area of mining land without valid permits. Nickel operations could be affected, especially smaller miners or forest-zone projects. Meanwhile, quota delays themselves can disrupt ore availability even before formal supply cuts take full effect.

Indonesian Nickel Oversupply Will Persist Unless Smelter Output Is Also Disciplined

Indonesian nickel oversupply is still concentrated in processed products, not in ore. Cutting ore quotas alone does not automatically solve NPI, matte, or MHP oversupply. Smelters can still try to secure imported feedstock from the Philippines or New Caledonia. However, those alternative sources remain limited and unreliable.

That means imported ore is a cost issue, not a structural solution. Greater reliance on foreign ore would lift smelter input costs and compress margins. It would not remove the global glut in downstream nickel products. Therefore, the policy may shift pressure upstream while preserving the same downstream oversupply.

Royalties could deepen that squeeze further. Higher nickel prices may trigger increased royalty rates on ore and processed products. That would raise costs across the chain at a time when refined markets remain weak. As a result, profitability could deteriorate even if LME prices stay temporarily supported.

The government may still adjust course later in the year. Producers can use part of earlier three-year approvals through the end of March, and market participants expect later reviews. That suggests the headline RKAB figure may not be a fixed ceiling. Even so, policy uncertainty is already becoming a stronger driver of nickel prices than actual market healing.

The Metalnomist Commentary

Indonesia is trying to influence prices through ore control, but the real surplus remains downstream. That mismatch could turn a refined nickel glut into an upstream bottleneck without delivering true market balance. Unless ore discipline is matched by smelter discipline, volatility will remain the defining feature of the nickel market.

Eramet Weda Bay Nickel Faces Care and Maintenance Risk as RKAB Quota Tightens

No comments
Eramet Weda Bay Nickel Faces Care and Maintenance Risk as RKAB Quota Tightens
Eramet - Nickel

Eramet Weda Bay nickel operations face a potential care and maintenance move in May after Indonesia approved a sharply reduced 2026 nickel ore quota. The French mining group said PT Weda Bay Nickel received an initial RKAB permit covering only 12mn wet metric tonnes of nickel ore production and sales.

The Eramet Weda Bay nickel quota is more than 70% below last year’s authorised level. PT WBN initially received 32mn wmt in 2025, later revised up to 42mn wmt.

Eramet has requested an upward revision to the 2026 permit. The company said the current quota will be exhausted by the middle of next month, making the permit decision the most important near-term issue for its nickel business.

The initial 12mn wmt permit includes 3mn wmt for internal use. This leaves Eramet’s external sales target at only 9mn wmt for 2026, well below the level implied by the mine’s operating capacity.

Indonesia’s RKAB Limits Threaten Ore Supply and NPI Continuity

PT Weda Bay Nickel is preparing to enter care and maintenance if the quota is not increased. Eramet said its nickel pig iron plant will continue operating using ore stocks, but the mining restriction creates clear supply risk.

The permit issue matters because Weda Bay is a key ore supplier inside Indonesia’s nickel ecosystem. Its saprolite ore supports nickel pig iron and stainless steel production, while limonite ore feeds high-pressure acid leach plants producing battery intermediates.

PT WBN delivered strong first-quarter output before the quota risk escalated. Marketable nickel ore production rose by 10% on the year to 10mn wmt.

External ore sales climbed by 54% to 8.3mn wmt. Saprolite sales increased by 27% to 4.8mn wmt, while limonite sales jumped by 118% to 3.6mn wmt.

The limonite increase was driven by stronger demand from HPAL plants at the Indonesia Weda Bay Industrial Park. Internal ore consumption for Eramet’s NPI plant was 1mn wmt during the quarter.

Strong sales partly reflected a weak comparison with early 2025, when IWIP plants were destocking after ending 2024 with high inventories. Still, the result shows that downstream demand remains firm.

PT WBN also continued to benefit from premiums of more than 100% above Indonesia’s benchmark floor price for high-grade saprolite. This reflected tight domestic ore supply and stronger competition for available material.

Nickel Market Rebalancing Depends on Permits, Sulphur and Ore Costs

Eramet’s nickel ferro-alloy production was broadly stable in the first quarter. Output reached 9,000t of nickel, down only 1% from a year earlier.

Adjusted nickel turnover, excluding New Caledonia’s Societe Le Nickel, rose by 43% to €163mn. Eramet’s share of PT WBN turnover, excluding its offtake contract, increased by 59% to €116mn.

The company said first-quarter market conditions were supportive. The average London Metal Exchange nickel price rose by 12% on the year to $17,362/t, driven partly by uncertainty over Indonesian ore supply.

Global primary nickel demand rose by 3% to 900,000t in the first quarter. Stainless steel, batteries and aerospace supported consumption.

Global primary nickel production fell by 3%, although the market remained in a modest surplus. Eramet said the nickel market could gradually rebalance over the rest of the year.

Restricted Indonesian mine permits are one reason. Sulphur supply problems are another, because they are raising costs for HPAL producers that depend on sulphuric acid or sulphur feedstock.

PT WBN’s production costs are expected to rise from 2025 levels. Eramet cited authorised volume limits, mining plan adjustments and higher fuel prices.

Indonesia’s revised mineral benchmark formula could also reshape ore economics. The formula, effective from mid-April, now includes cobalt and other contained metals in ore valuation.

This change could increase costs for HPAL feedstock and alter the economics of limonite supply. It also strengthens the government’s ability to capture more value from contained metals in nickel ore.

For Eramet Weda Bay nickel operations, the quota decision will determine whether strong first-quarter performance can continue. Without a higher RKAB, the mine faces a sudden operating constraint despite firm downstream demand.

The Metalnomist Commentary

Eramet Weda Bay nickel is becoming a test case for Indonesia’s tighter control over ore supply. If the RKAB quota is not revised, the impact will reach beyond one mine and reinforce cost pressure across NPI, HPAL and battery-linked nickel supply chains.

Glencore's 3Q Metals Output: Copper, Zinc, and Cobalt Decline, Ferro-Chrome Surges

No comments
Glencore

Global mining giant Glencore reported a mixed performance in its base metals production for the third quarter of 2024. While the company saw a decline in the output of several key metals, its ferro-chrome production experienced a sharp rise.

Base Metals Production Declines

  • Copper: Glencore produced 242,600 tonnes of refined copper in Q3 2024, marking a 2% decline compared to the same quarter last year. This brings the total for January-September 2024 to 705,200 tonnes, down 4% year-on-year, though the decrease was somewhat mitigated by the sale of the Cobar mine in Australia in June 2023.
  • Cobalt: Cobalt production also saw a 2% decline in Q3, totaling 10,600 tonnes. For January-September 2024, the total cobalt output fell by 18% to 26,500 tonnes, primarily due to reduced run rates at the Mutanda mine in the Democratic Republic of Congo, which adjusted operations in response to the challenging cobalt pricing environment.
  • Zinc: Zinc output decreased by 5% to 226,400 tonnes in Q3, and by 4% for the January-September period. Contributing to the decline was lower output from the Antamina mine in Peru, caused by mining sequences with lower zinc grades and higher copper grades, as well as operational disruptions due to a tropical cyclone at the McArthur River operation in Australia.
  • Nickel: Glencore's nickel production also saw a significant decrease of 18% to 18,100 tonnes in Q3. This was primarily driven by the transition of the Koniambo operation in New Caledonia into care and maintenance starting in February 2024. Despite a slight increase in output from the Murrin Murrin mine in Australia, total nickel production for January-September 2024 fell 9% year-on-year to 62,300 tonnes.

Ferro-Chrome Production Surge

In a positive development, Glencore's ferro-chrome production surged by 89% in Q3 2024, reaching 295,000 tonnes. This helped bring the total for January-September to 894,000 tonnes, up 2% compared to the same period in 2023. This increase is especially notable after a 16% decline in ferro-chrome production during the first half of 2024, attributed to the continued idling of the Rustenburg smelter. Glencore did not specify whether the surge in Q3 ferro-chrome production was due to the restart of the Rustenburg smelter, but the company indicated that higher production rates and fewer offline days at its other smelter complexes in South Africa may have contributed to the positive results.

Supply Cuts to Rebalance Nickel Market, Says Nornickel

No comments

Russian metals giant Norilsk Nickel (Nornickel) has projected a long-term rebalancing of the global nickel market, driven by price-induced closures of nickel operations, particularly in Australia and New Caledonia. These supply cuts, combined with a steady rise in demand, are expected to increase the floor price of nickel from its current range of $16,000-17,000 per ton.

Short-Term Nickel Market Outlook

In the short term, Nornickel holds a neutral stance on nickel prices. While supply cuts from loss-making operations are underway, the growing supply of Chinese Class 1 nickel—most of which is being delivered to the London Metal Exchange (LME) warehouses in Asia—has kept prices in check. The nickel market experienced a surplus of 75,000 tons in the first half of 2024, with exchange stocks rising by 40,000 tons during the same period. Nornickel estimates the global surplus will remain at 100,000 tons annually for both 2024 and 2025.

Impact of Falling Prices on Nickel Production

The sharp decline in nickel prices this year, which saw the metal dip below $16,000 per ton, has put significant pressure on producers. Nornickel estimates that over half of the world’s nickel production is currently generating only marginal positive cash flow. Approximately 400,000 tons of global nickel capacity is either idle or at risk of closure. However, the company expects a steady rise in nickel demand, driven by stainless steel production in China, a recovery in Indonesia, and continued growth in the aerospace, oil and gas, and military sectors, which require specialized alloys and superalloys.

Palladium Market Outlook and Financial Challenges

In addition to its outlook on nickel, Nornickel anticipates easing in the palladium market’s destocking by the end of the year. The company expects palladium to remain in deficit, with a shortfall of 400,000 ounces and a 2% year-on-year drop in demand to 9.6 million ounces.

Nornickel’s financial results for the first half of 2024 reflect the challenges faced by the nickel and palladium markets. Revenue dropped by 22% to $5.606 billion, while EBITDA declined by 30% to $2.35 billion. Net profit fell by 23% to $829 million. The group attributed these declines to logistical disruptions, including issues in the Red Sea, and complications arising from Western sanctions on Russia.

Copper Market Outlook

Nornickel remains cautiously optimistic about copper prices in the medium term, although near-term signals are bearish due to persistent inflation in Europe and the U.S., and deflationary concerns in China, the world's top copper consumer.

Glencore Q1 Cobalt and Copper Production Shows Divergent Trends in Volatile Market

No comments
Glencore Q1 Cobalt and Copper Production Shows Divergent Trends in Volatile Market
Cobalt

Cobalt Output Soars While Copper and Nickel Face Steep Declines

Glencore Q1 cobalt and copper production revealed mixed results, highlighting the challenges of commodity volatility and mine-specific dynamics. The company’s cobalt output surged 44% year-on-year to 9,500 tonnes, driven by improved grades at its Mutanda mine in the DRC. In contrast, copper production dropped 30% to 167,900 tonnes due to lower grades and recovery rates at Chilean operations like Collahuasi and Antapaccay.

Zinc Rises, Nickel and Ferro-Chrome Falter

Meanwhile, nickel production fell 21% to 18,800 tonnes, largely due to the Koniambo mine transition in New Caledonia. On the positive side, zinc production rose 4% to 213,600 tonnes, supported by strong output from Antamina in Peru and Australian operations. Ferro-chrome production declined 7%, with Glencore citing market-driven management decisions and high energy costs in South Africa.

Cobalt Supply Tightness and Copper Recovery Outlook

The Q1 performance positions Glencore to benefit from tight cobalt supply, especially following the DRC’s export suspension that lifted China’s cobalt hydroxide prices. However, copper’s poor start may weigh on H1 earnings, though CEO Gary Nagle anticipates a rebound in output later in the year. Glencore maintained full-year guidance for all core metals, signaling confidence in operational recovery despite short-term setbacks.

The Metalnomist Commentary

The latest Glencore Q1 cobalt and copper production figures reflect a market caught between supply shocks and operational setbacks. While cobalt shows strength amid geopolitical friction, copper’s rebound will be crucial for sustaining Glencore’s broader portfolio performance in 2024.

EU Selects 13 Strategic Raw Material Projects Outside the Bloc

No comments
EU Selects 13 Strategic Raw Material Projects Outside the Bloc
EU strategic raw material projects

EU Seeks to Diversify Critical Mineral Supply Chains

The European Commission has approved 13 strategic raw material projects outside the European Union, estimating a total capital investment of €5.5bn ($6.26bn) to bring them online. Chosen from 49 applications, these projects span Brazil, Canada, Greenland, Kazakhstan, Madagascar, Malawi, New Caledonia, Norway, Serbia, South Africa, the UK, Ukraine, and Zambia. Under the 2024 EU Raw Materials Act, the bloc aims by 2030 to domestically extract 10pc, process 40pc, and recycle 25pc of 17 strategic raw materials. Additionally, no single third country should supply more than 65pc of annual EU consumption.

Targeting Lithium, Nickel, Cobalt, Manganese, and Rare Earths

Ten of the approved projects focus on lithium, nickel, cobalt, manganese, and graphite, while two — Songwe Hill in Malawi and Zandkopsdrift in South Africa — will extract rare earth elements. Other notable initiatives include Rio Tinto’s Jadar lithium and boron project in Serbia, the Integrated Dumont Nickel Project in Canada, Kobaloni Energy’s cobalt processing in Zambia, and Balakhivka Graphite Deposit in Ukraine. The EU will provide coordinated support, including facilitating finance and connecting projects with potential off-takers. Industrial commissioner Stephane Sejourne emphasised that diversifying away from dependency on countries like China is critical, given current reliance levels exceeding 100pc in some refining and recycling segments.

The Metalnomist Commentary

The EU’s latest selections mark a significant expansion of its global strategic raw material network, signalling an urgent push to secure supplies ahead of the 2030 targets. While the €5.5bn investment is substantial, long-term success will depend on execution speed, environmental considerations, and stable geopolitical relations with host nations.

China’s FeNi and MHP Imports Decline in August, but Nickel Matte Surges

No comments
FeNi

China experienced a decline in Ferro-Nickel (FeNi) and mixed hydroxide precipitate (MHP) imports during August, largely due to shipment delays caused by typhoons. Despite this, the country saw a rise in nickel matte imports, reflecting increased availability of matte with lower nickel content.

Indonesia's Role in Nickel Supply Dominates

In August, China imported 522,315 metric tons of ferro-nickel, marking a significant 36% drop compared to the same period last year and a 43% decline from July. Although imports from other suppliers like New Caledonia, Brazil, and Colombia rose, the drop from Indonesia, China’s largest supplier, was much steeper.

Indonesia continues to dominate China’s nickel supply, providing 95% of nickel pig iron (NPI), 90% of nickel matte, and 80% of MHP imports. Indonesia’s expanding stainless steel output, driven by lower production costs, boosted NPI exports to markets like India, South Korea, Italy, and Germany, further emphasizing Indonesia’s role in the global nickel supply chain.

China’s nickel matte imports surged in August, increasing by 25% from the previous month and by 72% on the year. Much of this rise is attributed to low-nickel matte imports, which have a nickel content of around 20%, compared to high-nickel matte with about 70% nickel content. Low-nickel matte is processed in China to produce higher-value nickel sulphate or nickel cathode.

Imports of nickel matte from Russia also saw notable growth, reaching 5,155 metric tons in August—a year-on-year increase of 18% and a doubling of imports from the previous month.

MHP Imports Drop Despite Lygend Project Growth

Mixed hydroxide precipitate (MHP) imports dropped by 11% compared to July, totaling 122,272 metric tons in August. This decline was driven by a 15% decrease in Indonesian arrivals, despite an 11% year-on-year rise fueled by the ramp-up of Indonesia’s Lygend project. Market participants are closely watching how these developments will shape future trends in China’s nickel imports.