Titanium Prices Hold as Inventory Drawdown Limits Spot Buying

Titanium

Titanium prices held steady in Europe and the US over the past month as mills, forgers and OEMs continued to rely on inventories instead of placing larger new orders. The market remained under pressure from surplus melt capacity and slower demand for standard-quality titanium used in airframe structures.

US 6Al 4V ingot prices stayed at $10-10.75/lb fob domestic producer, with some spot purchases still taking place near $10/lb. Mills kept offers broadly stable below $11/lb, although at least one producer quoted above that level for larger orders.

Titanium prices also remained flat in Europe, with 6Al 4V ingot assessed at $19.50-21.50/kg du Rotterdam. Forgers continued to work through high inventories of mill products before committing to new intermediate material purchases.

Aerospace Inventory Drawdown Keeps Pressure on Standard Titanium

Aerospace demand remained uneven as Boeing and Airbus continued inventory drawdowns. This primarily affected standard-quality titanium used in airframe structures, where consumption has been slower than in higher-specification applications.

Surplus melt capacity kept pressure on ingot prices. Market participants said lead times for basic Grade 5 ingot were around eight to 10 weeks, while some producers could likely deliver within six weeks if pushed.

Demand was stronger in premium-quality ingot for engine applications. Defence and medical markets also showed pockets of resilience, giving titanium producers some support outside standard aerospace structures.

Sponge and Commercially Pure Titanium Markets Stay Stable

Titanium sponge contract prices also remained stable. TG100 grade sponge long-term contract prices were assessed at $11-12/kg du Rotterdam in March, in line with standing 2026 contracts.

Saudi Arabian producer ATTM continued to operate normally, despite wider Middle East conflict risks and disruption around the Strait of Hormuz. The conflict has affected regional freight routes and disrupted some metals supply chains, but no direct titanium sponge impact was reported.

Commercially pure titanium ingot prices were also unchanged. CP Grade 1 ingot held at $12-14/kg cif main port, while CP Grade 2 ingot stayed at $11.10-12/kg cif main port.

Buyers avoided finalising new contracts as they focused on reducing stocks. However, inventory clearing remains difficult because lower-cost Chinese material continues to compete aggressively in downstream industrial markets.

The Metalnomist Commentary

Titanium prices are stable, but the market is not yet strong. The real divide is between standard aerospace titanium, where inventories still weigh on demand, and premium-quality, defence and medical applications, where strategic consumption remains firmer.

Titanium Grade 7 Ingot Production Achieved by DongA Special Metal Using Recycled Scrap

DongA Special Metal's Titanium Grade 7 Ingot

Korea’s first Ti Gr.7 ingot production from scrap marks breakthrough in domestic titanium alloy manufacturing

PAM and ISM technologies enable supply chain innovation for chemical and nuclear-grade titanium products

South Korea’s DongA Special Metal has successfully achieved titanium Grade 7 ingot production using palladium-added scrap, marking a first in the nation’s metallurgical history. The company announced that the Titanium Grade 7 ingot production was completed using plasma arc melting (PAM) technology and sold entirely to a U.S.-based metal processing company.

Advanced melting meets global demand for high-purity corrosion-resistant alloys

Titanium Grade 7 is a high-value alloy used in harsh chemical environments, thanks to its outstanding corrosion resistance. However, its production from recycled scrap is notoriously difficult, due to the high melting point and the need for precise composition control. To overcome this, DongA adopted PAM technology and integrated it with ISM (Induction Skull Melting) equipment—enabling simultaneous refining, remelting, and continuous casting.

This approach contrasts with the global standard, where 75% of titanium ingots are still made using vacuum arc remelting (VAR). DongA’s use of PAM-ISM fusion technology positions it ahead in recycling-based alloy innovation, especially for critical industries.

Domestic production reduces import dependence for chemical, nuclear, and desalination sectors

The company’s 1-ton titanium ingot facility, the largest in Korea, now supports local sourcing for semiconductor, display, and chemical process equipment manufacturers. Titanium Grade 7 is essential for chlorine process systems, wet chlorine coolers, ion exchange membrane equipment, nuclear condenser tubing, and desalination heat exchangers.

This milestone also opens the door for strategic collaboration with Korean industrial players and public R&D institutions. The successful export to the U.S. underscores DongA’s technical competitiveness in alloy design and electrochemical understanding of the palladium-titanium system.

The Metalnomist Commentary

DongA Special Metal’s innovation in Titanium Grade 7 ingot production signals Korea’s move up the titanium value chain. By mastering scrap-based high-purity alloy production, the firm reduces import dependency and strengthens national capabilities in strategic sectors like nuclear energy, semiconductors, and chemical equipment.

Aerospace-grade titanium ingot order strengthens India’s space titanium supply chain

PTC Industries

India’s aerospace-grade titanium ingot order signals faster domestic capability for space programs. PTC will execute this aerospace-grade titanium ingot order for ISRO’s Vikram Sarabhai Space Center. As a result, the deal accelerates India’s push for reliable 6Al-4V capacity.

From titanium sponge to 6Al-4V ingots for space hardware

The contract centers on converting 40 tonnes of Grade 1 titanium sponge into 6Al-4V ingots. PTC will use double vacuum arc remelting to hit aerospace consistency. Meanwhile, its Aerolloy unit already commissioned VAR and VIM furnaces in September.

PTC also positions the order as a stepping stone to wider aerospace qualification. Therefore, the company can translate space-grade deliveries into broader defense demand. The aerospace-grade titanium ingot order also validates its process route for premium alloys.

PAM scale-up expands scrap flexibility and alloy development

Aerolloy completed installation of a plasma arc melting furnace in Lucknow. The PAM line targets 600 tonnes per year of titanium ingots. Meanwhile, Aerolloy plans trial loads as commissioning begins.

The PAM furnace improves yield control when using turnings and smaller scrap forms. However, scrap sourcing still requires strict segregation and chemistry discipline. Therefore, PAM plus VAR can support smaller-batch “exotic” alloy programs with tighter specifications.

PTC is also building a fully integrated titanium platform across the value chain. The company aims to add upstream sponge and expand casting and machining services. Meanwhile, supply agreements with aerospace primes support longer-term demand visibility.

The Metalnomist Commentary

This order matters because it links space procurement to scalable industrial melting capacity. However, qualification depth will decide whether PTC wins recurring engine and airframe work. The winners will pair melting scale with repeatable metallurgy and inspection throughput.

UKTMP Titanium Sales Rise Despite Aerospace Supply Chain Weakness

Ust-Kamenogorsk Titanium and Magnesium Plant

UKTMP titanium sales increased in 2025 despite weaker-than-expected aerospace demand and continuing supply chain disruption at Airbus and Boeing. UKTMP International reported sales of $199mn, up 5.3% from $189mn in 2024.

UKTMP titanium sales were concentrated in Europe and the US, which accounted for 47% and 44% of total revenue, respectively. Kazakhstan represented 6% and India 3%.

UKTMP titanium sales growth came despite lower titanium sponge and ingot volumes than originally anticipated. Aircraft manufacturers and titanium suppliers continued reducing inventories after expected aerospace production growth failed to materialise.

Gross profit increased by 18% to $11mn, although operating profit declined to $2.7mn from $3.4mn a year earlier.

Aerospace Weakness Pushes Sponge Output Lower

UKTMP produced 15,000t of titanium sponge in 2025, down from 19,000t in 2024. The company expects output to fall further to 13,000t in 2026.

That would leave production at only half of UKTMP's 26,000 t/yr nameplate capacity, highlighting the gap between installed supply and current aerospace consumption.

The decline reflects problems across the aircraft supply chain rather than a structural loss of titanium's importance. Airbus and Boeing continue to face constraints across engines, components and supplier networks, slowing aircraft production and titanium consumption.

Inventory normalisation has added further pressure. Titanium suppliers had built stocks in anticipation of stronger airframer demand, but slower production forced manufacturers to reduce purchases and work through existing material.

UKTMP nevertheless secured a new five-year agreement with Boeing through 2030. Initial volumes are lower than the producer had expected, although the contract allows for higher deliveries during its term.

The company also signed another long-term contract with an undisclosed customer and is advancing negotiations with a US titanium producer.

These agreements provide longer-term sales visibility even while near-term sponge utilisation remains weak.

Logistics and Energy Costs Pressure Kazakhstan Supply

UKTMP continues to face higher freight costs because it cannot use Russian ports to ship material. Alternative logistics routes increase transport complexity and raise delivered costs for customers in Europe and the US.

Electricity prices are another concern. The producer has been informed of further increases in power costs during 2026, adding pressure to titanium sponge economics.

Titanium sponge production is energy intensive, meaning electricity prices have a direct impact on competitiveness. Lower utilisation can compound that pressure because fixed operating costs are spread across fewer tonnes.

UKTMP is also preparing a new titanium alloy ingot product that could provide additional growth opportunities. The company has not disclosed the alloy or intended market.

Moving further downstream into alloy ingot could help UKTMP capture more value than sponge production alone and reduce its dependence on commodity-style raw material sales.

The strategy becomes increasingly important while aerospace titanium demand remains below earlier expectations. Producers able to combine sponge, ingot and long-term customer agreements should be better positioned when aircraft production eventually accelerates.

The Metalnomist Commentary

UKTMP's falling sponge output shows that aerospace titanium demand remains constrained by aircraft production rather than metal availability. Its long-term contracts and move toward alloy ingot suggest the company is preparing for recovery while protecting itself from prolonged weakness in commodity sponge demand.

US titanium scrap-sponge ratio set to shift as melters chase margins

Titanium Scrap

The US titanium scrap-sponge ratio is poised to shift as melters chase cheaper inputs in 2026. Premium titanium sponge prices and weak downstream demand are squeezing margins and forcing producers to reconsider melt mixes. As a result, the US titanium scrap-sponge ratio could move decisively toward higher scrap utilization across many grades.

Furnace expansions support higher scrap utilization

Capacity expansions at ATI, Perryman and Timet will give melters more room to adjust the US titanium scrap-sponge ratio. Their projects are expected to add nearly 30,000 t/yr of ingot production capacity once fully ramped, according to Metalnomist estimates. Consequently, scrap utilization capacity could rise by 22pc to 111,215t in 2026 compared with 2024, ELG Utica Alloys’ Nick Corby told the International Titanium Association conference.

However, not every alloy can fully pivot away from sponge, because certain grades still require premium sponge for purity. Grade 5 (6Al-4V) ingot can be melted from 100pc scrap, which encourages a higher US titanium scrap-sponge ratio when prices favor recycled inputs. Importantly, melters can alter the scrap and sponge ratio without major downtime, allowing them to track raw material prices and supply conditions in real time.

Meanwhile, destocking in commercial aerospace could cap the practical impact of these technical options. Boeing and Airbus are signalling another year of subdued orders for ingot and milled products as they normalise inventory. This means melters already grappling with weaker demand may push deliveries out or no-quote dealers on certain grades, even as the US titanium scrap-sponge ratio tilts structurally toward scrap.

Global scrap flows deepen market distortions

Scrap sourcing dynamics will play a critical role in how far the US titanium scrap-sponge ratio can shift. The US accounts for around 95pc of global consumption of aerospace-grade titanium scrap, making it the natural sink for high-grade revert. Imports are crucial, covering more than half of US raw material needs and bridging gaps in domestic generation.

Historically, Europe supplied much of this scrap, reflecting its strong base of forging and machining operations. Long-standing supply agreements and buy-back schemes cemented a circular flow of titanium between the two regions. However, shifts in downstream processing toward Asia are eroding Europe’s share, even as titanium activity in countries like China accelerates.

China is on track to increase global titanium scrap exports by 64pc in 2025 to 5,874t, with most of that likely moving into the US. Officially, the US has only imported 434t of titanium scrap from China this year, US Commerce Department data show. Yet market participants say Chinese-origin scrap often reaches the US via other Asian countries to circumvent 25pc tariffs, complicating visibility.

As a result, the supply chain looks “inconsistent”, with scrap availability not matching lower generation rates caused by delayed aircraft build schedules and OEM stockpiles. Corby noted that imports are expected to exceed exports by 19,460t this year, the widest gap since records began. At the same time, European ferro-titanium consumers face weak steel demand and index-driven price pressure, cutting their appetite for scrap and pushing more material toward US buyers.

The Metalnomist Commentary

The evolving US titanium scrap-sponge ratio highlights how price signals, furnace investments and trade flows interact across the titanium ecosystem. For melters, flexibility in melt mixes is becoming a strategic hedge against stubborn sponge prices and volatile aerospace demand. For scrap generators and intermediaries, rising US dependence and opaque routing via Asia could keep differentials wide — and margins attractive — well into the next aerospace upcycle.

Titanium Scrap Demand and Prices Expected to Rise in 2025, Driven by Boeing Recovery and Melter Expansions

Titanium Scrap

The outlook for titanium scrap is becoming increasingly positive as demand is expected to surge in the second half of 2025. This rise is driven by a recovery in aerospace manufacturing, particularly from Boeing, and planned expansions in titanium melting capacity. These factors are expected to have a significant impact on the titanium scrap market, which has faced challenges throughout 2024.

Boeing and Aerospace Recovery

After a year marked by disruptions in production schedules and supply chain bottlenecks, aerospace manufacturers are expecting a rebound. In 2024, the anticipated increase in titanium scrap demand did not materialize as expected, largely due to production missteps at Boeing and delays in Airbus’s ramp targets. However, a recovery in Boeing's production, particularly of the 737 MAX and the 787 Dreamliner, is poised to fuel higher scrap consumption.

Boeing’s 737 MAX production, which was temporarily halted due to a seven-week strike, is set to resume, providing a strong signal for the titanium scrap market. The 787 Dreamliner, which contains about 15% titanium compared to 6% for the 737 MAX, will also contribute to increased demand. Despite facing parts shortages earlier in 2024, Boeing has indicated that it will resolve these issues by the end of the year, paving the way for normalized production rates in 2025.

Titanium Melters’ Expansions and Ingot Production

Another key factor influencing the titanium scrap market is the expansion of titanium melters’ capacity. With new ingot production facilities scheduled to come online in 2025, there is a clear indication that titanium melters will be looking to source more aerospace-grade scrap to feed their new furnaces. Companies such as ATI, Titanium Metals (TIMET), and Perryman are investing heavily in capacity expansions to meet growing demand for titanium products.

ATI’s expansion at its Richland, Washington, operations will increase melting capacity by 35% over 2022 levels, while TIMET’s new plant in Ravenswood, West Virginia, is expected to produce 33 million lbs of ingot annually once fully operational. Perryman, meanwhile, is ramping up its facility in Coal Center, Pennsylvania, increasing its melting capacity by 16 million lbs to 42 million lbs annually. These expansions are expected to create more competition for available titanium scrap, potentially driving up prices.

Impact of Tariffs and Political Uncertainty

However, the market remains uncertain due to potential changes in U.S. trade policies under President-elect Donald Trump. Trump’s proposed tariffs, which could impose duties of up to 60% on imports from China, 25% on imports from Mexico and Canada, and a 20% duty on all other imports, have raised concerns among market participants. Such tariffs would increase the cost of titanium scrap imports, particularly from regions like Europe and Japan, which could be devastating for the industry if they are implemented.

Titanium scrap imports to the U.S. have already increased significantly in 2024, reaching 23,578 metric tonnes through October, surpassing the previous year’s total. While the threat of tariffs remains uncertain, it could create additional market disruptions that would further complicate the scrap supply chain.

Conclusion

While 2024 proved to be a challenging year for the titanium scrap market, 2025 is shaping up to bring a significant rebound. The resumption of Boeing's production and continued expansions in titanium melting capacity should drive stronger demand for aerospace-grade scrap. However, political uncertainty surrounding tariff policies remains a major wildcard that could affect the broader market dynamics. As the industry braces for these changes, stakeholders are carefully watching for signs of recovery and growth.

China Titanium Sponge Capacity Surge Deepens Oversupply Pressure

Titanium Sponge

China titanium sponge capacity is set to expand sharply through 2026, intensifying oversupply, margin pressure and competition across the domestic titanium industry. Operating capacity is expected to reach 411,000 t/yr by year-end, with more than 130,000 t/yr of new capacity planned.

China titanium sponge capacity could exceed 550,000 t/yr within three to five years, far outpacing recent growth in downstream titanium ingot and mill product output.

China titanium sponge capacity growth is becoming increasingly difficult to absorb because demand from major end-use sectors remains weak. Chemical, aerospace and consumer electronics consumption all declined in 2025.

The mismatch is pushing Chinese producers toward exports, but trade barriers, carbon costs and weaker Japanese demand could limit how much excess sponge can be absorbed overseas.

Sponge Supply Is Growing Faster Than Downstream Titanium Demand

China’s nine operating sponge producers produced 281,000t in 2025, up 9.8% from a year earlier.

Downstream growth was slower. Titanium ingot production increased by 6.2% to around 169,900t, while mill product output rose by 6.4% to 183,000t.

This widening gap is increasing inventory and pricing pressure across the titanium chain.

The chemical industry remained China’s largest titanium-consuming sector in 2025, accounting for 73,172t of mill product demand. Consumption nevertheless declined slightly from the previous year.

Aerospace demand fell to 30,796t, down by 1,396t, while computer, communications and consumer electronics demand dropped by 2,266t to 7,933t.

Weak demand in these sectors is particularly problematic because much of China’s sponge production remains concentrated in lower-end grades.

Domestic producers therefore face increasingly homogeneous competition, where multiple suppliers compete for the same chemical and industrial applications.

Revenue and margins are already under pressure, and additional capacity expected in 2026 could make operating conditions even more difficult.

Exports Face Carbon, Quality and Geopolitical Barriers

Chinese producers are increasingly looking overseas to absorb excess titanium sponge supply, but export markets present their own challenges.

Europe’s carbon border policies could weaken Chinese price competitiveness because domestic sponge production is highly electricity intensive.

Chinese producers typically consume around 24,000 kWh of electricity per tonne of titanium sponge, compared with around 10,000 kWh/t in Japan.

That difference could become increasingly important as customers and regulators place greater value on embedded carbon.

Japan is another difficult market. Deteriorating China-Japan relations have already reduced orders, limiting one of the more logical outlets for Chinese surplus production.

Quality is also a structural constraint.

Chinese producers still lag established Japanese suppliers such as Toho Titanium and Osaka Titanium in high-purity sponge used in demanding aerospace and premium alloy applications.

This means additional capacity does not automatically translate into access to higher-value markets.

The industry therefore faces a strategic choice. Producers can continue competing on volume and price in lower-end markets, or invest in purity, consistency, carbon efficiency and downstream integration.

The Metalnomist Commentary

China’s titanium problem is shifting from insufficient capacity to excessive low-end capacity. Without stronger aerospace demand or major upgrades in purity and energy efficiency, new sponge projects risk intensifying price competition rather than creating higher-value growth.

Titanium Exempt from New US Reciprocal Tariffs Amid Broader Aerospace Uncertainty

Titanium Ingot

Titanium Scrap and Alloys Dodge Latest Tariff Wave, but Market Unease Persists

Titanium and its derivatives, including scrap and ferro-titanium, were notably exempted from the latest round of US reciprocal tariffs announced on April 2. Annex II of President Donald Trump’s executive order outlined the list of exemptions, sparing various nonferrous metals, including titanium, from additional duties.

However, existing tariffs on titanium products remain unchanged. These include a 60% duty on Chinese titanium sponge and a 15% duty on unwrought titanium from Japan, Kazakhstan, and Saudi Arabia. While titanium scrap imports from the EU and UK are also exempt, pre-existing duties—such as the 20% tariff on Chinese titanium added in March—still apply.

Meanwhile, concerns linger about supply disruptions, particularly in vacuum-grade titanium scrap. The US depends heavily on EU and UK sources to meet demand for ingot melting in aerospace-grade production.

Aerospace Industry Caught in the Crossfire of Uncertain Trade Measures

The aerospace supply chain could still face ripple effects, especially concerning finished parts, components, and jet engines. Major OEMs such as Airbus, Boeing, and Rolls-Royce remain cautious, stating that they are assessing the impact of the new tariffs.

Jet engines like CFM’s Leap-1A and 1B, which power the Airbus A320neo and Boeing 737 Max, span a US-French supply chain, raising questions about the impact of cross-border tariffs on subcomponents. Landing gear systems produced by Safran for the Boeing 787 and turbine modules from GE in the US to France further complicate the situation.

While titanium producers currently report no impact on OEMs for titanium-based parts, the ambiguity surrounding composite materials and mixed-alloy components could lead to future disruptions.

China's Tariff Retaliation Raises Stakes for US Aerospace Exports

In response, China has imposed a 34% tariff on all US imports, with no exemptions, escalating the trade conflict. This will impact US titanium exports to China—totaling 1,300t in 2024—mainly in bars, rods, and wire, as well as aerospace components vital to Comac’s C919 jet program.

China’s C919 relies on US-sourced Leap-1C engines, avionics from Honeywell Aerospace, GE Aerospace, and Collins Aerospace, making it vulnerable to retaliatory tariffs.

Although China sources the majority of its titanium domestically, these duties highlight the fragile interdependence of global aerospace production.

The Metalnomist Commentary

Titanium’s tariff exemption provides momentary relief to US aerospace and scrap processors, but the real uncertainty lies in composite supply chains. As the US and China entrench their trade defenses, aerospace firms must prepare for further regulatory fragmentation. Strategic stockpiling, diversified sourcing, and diplomatic engagement will define resilience in the next phase of industrial policy shifts.

PTC Industries Secures Titanium Sponge Supply Deal with ATTM

PTC Industries

Strengthening India's Aerospace Titanium Supply Chain

Indian manufacturer PTC Industries has entered into a strategic titanium sponge supply agreement with Amic Toho Titanium Metal (ATTM) of Saudi Arabia. This partnership follows PTC's recent commissioning of a vacuum arc remelt (VAR) furnace, a move aimed at boosting India's titanium ingot production capacity.

Expanding Titanium Ingots Production in India

PTC’s subsidiary, Aerolloy Technologies, operates the newly launched VAR furnace, which boasts a 1,500 t/yr melting capacity. This advanced facility can produce aerospace-grade titanium ingots, a critical material for aviation, defense, and high-performance industries. The agreement with ATTM ensures a stable supply of titanium sponge, a vital raw material for ingot production.

Titanium sponge is melted alongside titanium scrap and master alloys, such as aluminum-vanadium, to form high-quality titanium ingots. However, India's domestic supply of titanium scrap remains limited, making imports from regions like Europe and Asia essential for a balanced melt mix.

ATTM’s Aerospace-Grade Titanium Expertise

ATTM, one of only four titanium sponge producers approved for aerospace applications, operates with a 15,600 t/yr nameplate capacity. This positions the company as a crucial supplier for PTC’s ambitions to expand India’s aerospace and high-performance titanium alloy capabilities.

By securing this agreement, PTC enhances its ability to meet the growing demand for high-quality titanium products, reducing reliance on fluctuating global scrap markets. The move aligns with India's vision of strengthening its aerospace and defense supply chains, reinforcing the nation's push for self-reliance in critical materials.

China Aerospace-Grade Titanium Sponge Exports Set to Rise as OEMs Diversify Supply

China Aerospace-Grade Titanium Sponge

China aerospace-grade titanium sponge exports are expected to rise over the next five years as western aerospace supply chains look for additional qualified raw material sources. Chinese producer Chaoyang Jinda Titanium expects international shipments of qualified aerospace-grade sponge to increase from around 1,000t this year to 10,000t by 2030.

The shift reflects a deeper change in the aerospace titanium supply chain. Western aircraft manufacturers and ingot melters are trying to reduce exposure to Russian supply, while aircraft build rates are expected to rise from 2027.

China aerospace-grade titanium sponge is therefore moving from a limited export niche into a potential supply-chain balancing tool. However, tariffs, qualification risk and geopolitical uncertainty will limit how quickly US and European buyers adopt Chinese material.

The opportunity is strongest in standard-quality structural titanium grades. Premium-quality sponge for engine, landing-gear and other critical applications is likely to remain controlled by established suppliers with long qualification histories.

Western Aerospace Buyers Face a Supply-Diversification Challenge

Aerospace-grade sponge demand is expected to recover from 2027 after a weaker 2026 caused by inventory normalisation. Mills have been reducing stocks of semi-finished titanium parts and raw materials, but aircraft production plans point to higher requirements later in the decade.

The timing is important. Airbus and Boeing both carry long aircraft backlogs, creating a decade of production visibility. This forces mills and original equipment manufacturers to look beyond short-term demand swings and secure raw material sources for future build-rate increases.

Western OEMs also continue to reassess Russian titanium exposure. If procurement from Russia declines, the market will need alternative aerospace-qualified sponge to fill the gap. Japan’s Toho Titanium and Osaka Titanium are expanding, while China is preparing to supply more qualified material.

Global approved aerospace-grade sponge supply excluding Russian products is expected to rise from about 74,000t this year to around 91,000t by 2030. Demand is expected to grow at a similar pace, leaving the market sensitive to which suppliers are included in purchasing programmes.

The supply-demand picture changes significantly depending on China and Russia. Excluding both suppliers creates a tighter market. Including them creates more apparent supply availability. This makes qualification and geopolitical acceptability just as important as physical capacity.

Some US ingot producers began qualifying Chinese titanium sponge in 2024. US imports from China rose to a 10-year high of 1,069t that year, showing that buyers were willing to test Chinese material when diversification pressure increased.

However, imports fell to 155t last year and no Chinese sponge imports were reported in January-February 2026. Tariff volatility, high mill inventories and policy uncertainty discouraged further purchasing.

This shows the main barrier for China aerospace-grade titanium sponge. Aerospace qualification requires multi-year commitments, stable documentation, repeatable quality and customer confidence. Buyers will not qualify a new source quickly if they fear trade rules could change again.

Titanium is exempt from the latest 10% US tariff, and overall duties have fallen back to 40% from 60%. But the rate itself is not the only issue. For aerospace buyers, volatility can be more damaging than the actual tariff level.

A mill can absorb or price a known tariff. It cannot easily build a long-term qualification strategy around unpredictable policy. This is why US buyers may limit Chinese sponge procurement to 15-20% of requirements, even if the material is technically acceptable.

Europe and Asia-Pacific may offer more immediate export channels. China already supplies aerospace-grade sponge to buyers in those regions, supporting shipments even when US demand is limited.

Capacity Expansion Could Change the Titanium Sponge Balance

China is preparing a large wave of aerospace-grade sponge capacity additions. Several major projects are scheduled to come on line soon, with combined new capacity of around 110,000 t/yr.

The scale is unprecedented. The planned additions exceed the combined existing capacity of Japan’s Toho and Osaka Titanium, Kazakhstan’s Ust-Kamenogorsk Titanium and Magnesium Plant, and Saudi Arabia’s ATTM.

China’s expansion is driven by two demand streams. Domestic aerospace demand is rising from the Comac C919 programme and military aircraft production. At the same time, producers expect higher export demand as western OEMs diversify away from Russia.

China’s titanium mill product demand already has a meaningful aerospace base. Aerospace applications accounted for about 20% of China’s titanium mill product demand in 2025, or roughly 31,280t. The chemicals industry remained the largest segment at 48%.

The domestic base gives Chinese sponge producers a stronger platform for quality improvement. Aerospace production experience matters because sponge qualification depends on consistency over time, not only nameplate capacity.

Still, some market participants question whether all new capacity can secure international aerospace qualification. New lines may need years of operating history before western melters and OEMs accept material for aircraft applications.

This is a critical distinction. China may have large physical capacity, but aerospace supply depends on approved, audited and repeatable production. Capacity alone does not guarantee market access.

Price competitiveness may support adoption. Domestic China aerospace-grade sponge prices have recently held firm at 55,000-57,000 yuan/t ex-works because of cost pressure. That remains competitive against some western supply routes, especially if buyers need alternative non-Russian material.

However, qualification is likely to split the market by application. Standard structural titanium grades are more likely to accept Chinese sponge over time. These grades support airframes and less critical structural components where qualification remains strict but less restrictive than engine-grade applications.

Premium-quality sponge will be harder to penetrate. Engine, landing-gear and other demanding aerospace uses require deeper qualification, tighter chemistry control and stronger confidence from prime contractors and tier suppliers.

Airbus’ titanium demand outlook adds another layer. The A350 is a high titanium-bearing platform, with titanium representing around 15% of aircraft weight. As A350 production rises toward 2027 and 2028, titanium demand visibility should improve across the supply chain.

That demand pull could make Chinese material more attractive if western supply tightens. But buyers will still balance cost, qualification, geopolitics and supply security.

For Chinese producers, the path is clear but difficult. They must prove consistent aerospace-grade quality, build long-term customer trust, manage export documentation and navigate trade policy risk.

For western OEMs, the decision is strategic. China aerospace-grade titanium sponge could reduce Russia exposure and improve supply flexibility. But it also introduces another geopolitical dependency at a time when aerospace and defence supply chains are under closer scrutiny.

The most likely outcome is partial adoption. Chinese sponge may become a growing supplement for standard-quality structural grades, while established Japanese, Kazakh, Saudi and other qualified suppliers remain central to premium aerospace applications.

The Metalnomist Commentary

China aerospace-grade titanium sponge will become harder for western aerospace supply chains to ignore as aircraft build rates rise and Russian exposure narrows. The decisive issue is not capacity, but whether Chinese producers can convert new output into trusted, qualified and politically acceptable supply.

Japanese Titanium Producers See Profit Boost Amid Strong Aerospace Demand

Titanium

Japanese titanium producers reported a rise in profits during the April to December 2024 period, driven by strong aerospace demand. However, inventory adjustments appear to be starting to impact delivery schedules. Key players in the industry, such as Osaka Titanium Technologies and Toho Titanium, have benefited from favorable market conditions, particularly the depreciation of the Japanese yen. While sales for these companies grew, the overall market landscape is showing signs of shifting demand dynamics.

Osaka Titanium's Performance Amid Currency Fluctuations

Osaka Titanium Technologies recorded an operating profit of ¥8.4 billion ($54.9 million) for the period, supported by a weaker yen that made its products more competitive in foreign markets. Despite this, the company experienced a 3.8% year-over-year decline in total sales within its titanium business, which amounted to around ¥38 billion. A significant part of Osaka's growth came from titanium sponge exports, mainly destined for the aerospace sector. These exports rose by 2.7% year-over-year, reaching ¥26.9 billion.

Although exports remain the core of Osaka's business—accounting for 71% of total sales—the growth rate was lower than anticipated. This slowdown was partly due to customers completing their inventory restocking in the prior fiscal year, reducing orders during the April to December 2024 period. On the domestic front, sales of titanium sponge, which caters to general industrial use, fell sharply by 16.8% due to weak demand and ongoing inventory adjustments.

Toho Titanium Sees Growth but Revises Forecast

Toho Titanium also reported strong financial results, with operating profit for its titanium metal business almost doubling to ¥5 billion. The company’s total sales surged by 16.4%, reaching ¥49 billion, driven by solid export demand, particularly from the aerospace industry. Exports make up approximately 65% of Toho's titanium metal sales, reinforcing the importance of international markets to its business model.

However, Toho has revised its sales forecast for the current fiscal year, lowering it by ¥4.5 billion to ¥65.2 billion. The revision stems from weaker-than-expected titanium ingot sales for non-aerospace industries in Japan, which has been impacted by slower economic growth in China. Despite this, the company remains optimistic about its aerospace export demand, though inventory adjustments within the industry are causing a slight drag on overall purchasing activity.

Conclusion: A Mixed Outlook for Japan's Titanium Producers

Overall, Japan's titanium producers are experiencing a favorable profit outlook, mainly supported by strong aerospace demand. However, the effects of inventory adjustments and weaker-than-expected domestic demand for non-aerospace titanium products have led to more cautious expectations for the remainder of the fiscal year. Both Osaka and Toho are adapting to these market shifts, with an eye on maintaining profitability amid evolving global conditions.

Aerospace OEMs Look to Reduce Dependency on Russian Titanium

VSMPO

Aerospace OEMs, including Airbus and Safran, are working to reduce reliance on Russian titanium as supply chain challenges grow due to rising tensions.

The Shift Away from VSMPO-AVISMA 

As global tensions escalate, aerospace original equipment manufacturers (OEMs) like Airbus and Safran are actively working to decrease their reliance on Russian titanium producer VSMPO-AVISMA. The urgency of this shift has heightened since Russian President Vladimir Putin’s recent call for export restrictions on critical metals like titanium, nickel, and uranium.

Airbus Multi-Sourcing Strategy

Airbus, a leading European aircraft manufacturer, is well-positioned in the short-to-medium term thanks to its diversified network of metal suppliers. An Airbus spokesperson told Metalnomist that efforts are underway to secure supply chain resilience through multi-sourcing strategies. However, Airbus has refrained from specifying a timeline for when it will completely sever ties with Russian suppliers.

Safran

Safran’s Progress Toward Decoupling 

French aerospace manufacturer Safran has been reducing its reliance on Russian titanium since February 2022. The company has made significant strides in qualifying alternative, non-Russian sources of titanium. According to a Safran representative, while the qualification of new suppliers takes 2-3 years depending on the complexity of the parts, the process is nearly complete. However, scaling up production to meet current demand remains a challenge across the industry.

Challenges of Securing Alternative Supplies 

VSMPO-AVISMA is the world’s largest titanium producer, and transitioning away from its supply chain has been a complex process for aerospace OEMs. One of the key obstacles is the exclusive contracts in place for critical parts like landing gear components, as well as the limited capacity for producing large-scale forgings and machining operations. Airbus acknowledged in October that it continues to honor its existing contracts in compliance with international sanctions, but reiterated its long-term goal of decoupling from Russian supply chains.

Boeing and the U.S. Response 

In contrast to Airbus, American aircraft manufacturer Boeing ceased all procurement from VSMPO-AVISMA in March 2022. Boeing also ended its forgings joint venture with the Russian company, Ural-Boeing Manufacturing. The U.S. has since imposed a 70% duty on titanium imports from Russia, further isolating the Russian supplier from the American market.

RTX

The Role of Nickel and Titanium in Aerospace 

Titanium plays a vital role in aerospace applications, including structural parts, fasteners, compressor blades, landing gears, and heat exchangers. Nickel, another metal facing export restrictions, is primarily used in high-temperature superalloys for the hot core of jet engines.

Global Sanctions and Industry Reactions The EU has yet to implement sanctions specifically targeting VSMPO, a move that contrasts with the more aggressive stance taken by the U.S. and Canada. Canada’s direct sanctions on VSMPO initially impacted companies like Airbus and Bombardier, but both received exemptions. U.S.-based RTX, however, faced complications and had to secure new titanium sources for its subsidiary, Collins Aerospace, which manufactures landing gear in Canada.

Future Prospects for Titanium Supply 

In response to the growing demand and the void left by VSMPO, U.S. titanium melters such as Timet, ATI, and Perryman are expanding their ingot melt capacities. Similarly, Japanese producers Toho Titanium and Osaka Titanium are investing in capacity expansion, though these efforts are expected to take several years to fully materialize.

Uncertainty Around Russian Export Restrictions 

Whether Russia will move forward with its export restrictions remains uncertain. Safran has stated it has no further information beyond Russia’s public statements, and Airbus has declined to comment on the matter. VSMPO’s largest shareholder, Industrial Investments, holds a 65.27% stake, while the Russian state-controlled defense firm Rostec owns 25%. Putin’s call for restrictions came with the caveat that they should not harm Russia, leaving the industry in a state of uncertainty.

DongA Special Metal Begins Mass Production of High-Purity Ferro-Titanium

DongA Special Metal - Fe-Ti(Ferro-Titanium)

Korean firm pioneers domestic supply of advanced ferroalloy using titanium scrap and sustainable refining technology

Strategic Entry into the Ferroalloy Market

DongA Special Metal, a South Korean metallurgy company, has launched commercial-scale production of high-purity, high-quality ferro-titanium, marking a strategic entry into the global ferroalloy market. Ferro-titanium — an alloy of iron and titanium — is a vital material in steelmaking, where it serves as a powerful deoxidizer and cleanser, especially for high-grade steels, stainless steel, and special alloys. Despite growing demand, Asia has long relied on imports from Japan and China, with no domestic mass-production capacity — until now.

Closed-Loop Scrap Recycling and Custom Alloy Precision

DongA’s breakthrough lies in its ability to produce ferro-titanium using recycled industrial titanium scrap, implementing a proprietary refining process that ensures strict impurity control and customizable titanium content. The firm’s production allows titanium content to be adjusted between 30–75%, with tailored particle sizes and distribution, offering superior quality consistency over traditional suppliers. “The key differentiator is stable quality with adaptable specs. That’s our competitive edge,” said Vice President Jae-Ie Jang in an interview with The Metalnomist.

Powder-Grade Product for Core Wire Export

Beyond ingot forms, DongA also produces ferro-titanium powder for cored wire applications, used to inject precise Ti content into molten steel. Due to stringent quality requirements in powder metallurgy, any inconsistencies would render the material unusable — yet DongA's product has earned international recognition and is now being exported abroad. In applications like aerospace, defense, and high-temperature industrial components, ferro-titanium ensures both performance and durability under extreme conditions.

From Domestic Substitution to Industrial Security

By securing ISO quality and environmental certifications, DongA aims to align its products with global standards, reinforcing Korea’s self-sufficiency in strategic materials. Amid increasing global supply chain risks — including recent tariff tensions led by the Trump administration — the localization of key inputs like ferro-titanium is emerging as a national competitiveness issue. DongA’s model of resource circulation and material independence could soon become a blueprint for Korea’s broader industrial resilience.

The Metalnomist Commentary

DongA Special Metal's entry into the ferro-titanium space is more than market diversification — it's a national-level materials strategy. With advanced purification technology, recycling innovation, and precision metallurgy, the firm not only reduces reliance on imports but also sets the stage for Korean alloys to lead in critical sectors like aerospace, defense, and next-gen steelmaking.

Global Aerospace-Grade Titanium Sponge Supply Expands Despite Japanese Slowdown

Titanium Sponge

Higher utilization in Kazakhstan and Saudi Arabia offsets Japan’s decline as China eyes industrial market growth

Global Titanium Sponge Output Rises in 2024

Titanium sponge production from aerospace-approved suppliers grew in 2024, reaching 89,000 metric tons — a 6% increase from 2023. This rise came despite a production decline in Japan, which was balanced by higher capacity utilization in Kazakhstan and Saudi Arabia. The U.S. Geological Survey (USGS) and industry data confirm this upward trend, driven primarily by strategic expansion in the Middle East and Central Asia.

Japan's production fell to 55,000t in 2024, down from 57,000t in 2023. Inventory adjustments by domestic aerospace consumers were the primary cause. In contrast, Saudi Arabia's AMIC-Toho Titanium Metal ramped up output to 15,000t, nearing its 15,600 t/year capacity. Kazakhstan also maintained high utilization levels, strengthening its role as a stable sponge supplier for critical aerospace applications.

China Expands Industrial Market Footprint

While China’s titanium sponge remains unqualified for aerospace, its influence in industrial markets surged in 2024. Chinese production held steady at 220,000t, but capacity climbed to as much as 320,000 t/year, according to market participants. Japan’s imports of unwrought titanium from China rose sharply — from 451t in 2023 to 1,198t in 2024 — suggesting increased acceptance of Chinese sponge and ingot in industrial-grade production.

China’s growing presence is reshaping competition, particularly in Japan, where CP-grade metal demand dominates. Although Chinese sponge lacks aerospace certification, Metalnomist understands that select U.S. buyers are testing small volumes for future qualification — despite ongoing tariff uncertainties. The U.S. imported 1,068t of sponge from China in 2024, up from 154t the year before.

U.S. Aerospace Demand Softens Amid Boeing Constraints

U.S. titanium sponge imports from Japan declined in 2024 to 27,692t, down from 31,387t in 2023. This contraction reflects softer demand from American ingot melters due to lower-than-expected build rates for Boeing’s 787 Dreamliner and 737 Max programs. Persistent supply chain challenges further impacted intake, signaling a temporary slowdown in titanium conversion activity for aerospace.

Despite this, global titanium sponge markets remain dynamic. Kazakhstan and Saudi Arabia continue to play a vital role in balancing supply, while China's push into the industrial sector could eventually redefine global sourcing strategies.

BTI titanium production start in 2026 reshapes Gulf titanium supply

Bahrain Titanium Factory Contract

Bahrain Titanium(BTI) titanium production start in 2026 moves closer as construction begins in Bahrain. The Interlink Metals unit reset the timeline from mid-2025 to early 2026. Stage one will produce 4,000 t/yr of CP slabs and 1,500 t/yr of 6Al-4V ingots. The BTI titanium production start in 2026 aims to supply industrial customers across the Gulf.

Stage one scope and target markets

BTI designed stage one to serve hard-wearing industrial systems. The mix covers chemical processing, desalination, marine, and power generation. As a result, CP slabs and grade-5 ingots should anchor reliable regional supply. Downstream users expect shorter lead times and reduced import risk.

Stage two, offtake, and feedstock strategy

BTI plans stage two to add billets and forgings with up to 10,000 t/yr capacity. Therefore, the company can target aerospace, medical, and defence demand. Letters of intent support early volumes from Interlink’s legacy Ukrainian customers. Meanwhile, the AMIC–Toho Titanium sponge LOI in Saudi Arabia remains active. BTI may also use Chinese sponge for non-critical industrial applications.

BTI is test-melting on a ferro-titanium furnace to widen its product slate. It is installing processing and crushing lines to feed that unit. Consequently, ferro-titanium production is slated to begin later this year. Bahrain’s US free-trade agreement further supports market access amid trade uncertainty.

BTI titanium production start in 2026 could rebalance Middle East titanium flows. The program introduces new slab and ingot capacity near end-markets. Moreover, the staged plan de-risks ramp-up while broadening alloy forms.

The Metalnomist Commentary

BTI’s sequencing is pragmatic: industrial first, certification-heavy segments later. Feedstock optionality across Saudi and China reduces sponge risk. Execution now hinges on qualifying forgings for aerospace and medical end-use.

Lockheed F-35 Labor Contract Secures Fort Worth Production Continuity

F-35

Lockheed F-35 labor contract has been ratified by unionized employees at the company’s Fort Worth, Texas, assembly site, removing the immediate risk of labor disruption at one of the most important US fighter aircraft production facilities.

Lockheed F-35 labor contract will run for five years through June 2031 and includes annual wage increases, additional vacation benefits and a $6,000 ratification bonus. Workers represented by the International Association and Aerospace Workers approved the agreement on 14 June.

Lockheed F-35 labor contract is strategically important for the aerospace materials supply chain because the F-35 is highly titanium intensive. Each aircraft contains an estimated 5,900lb of titanium, equivalent to roughly 20% of total aircraft weight.

The agreement therefore provides greater production certainty not only for Lockheed Martin, but also for titanium mills, forgers, machinists and component suppliers tied to the F-35 programme.

Labor Stability Protects F-35 Production Schedules

The previous labor agreement was due to expire at midnight on 14 June, creating the possibility of disruption if negotiations failed.

Lockheed and the union reached a tentative agreement on 11 June before workers formally ratified the contract three days later.

The agreement also covers employees at Edwards Air Force Base in California and Patuxent River Naval Air Station in Maryland, extending labor stability beyond the Fort Worth assembly operation.

For Lockheed, avoiding a work stoppage is particularly important because fighter aircraft production depends on highly specialised labour and tightly coordinated supplier schedules.

A prolonged disruption at final assembly could quickly affect upstream suppliers because aerospace components are produced according to programme-specific delivery schedules and qualification requirements.

The five-year agreement gives Lockheed greater visibility over workforce costs and production continuity through the end of the decade.

Titanium Supply Chain Benefits From Production Continuity

The F-35 remains one of the most titanium-intensive major aircraft programmes. Titanium is used extensively because of its high strength-to-weight ratio, corrosion resistance and compatibility with composite structures.

At around 5,900lb of titanium per aircraft, changes in F-35 production volumes can have a meaningful impact on aerospace-grade titanium demand.

The material requirement extends beyond sponge and ingot. F-35 production supports demand for titanium plate, billet, forgings, castings, machined components and scrap recycling across a highly qualified supply chain.

Labor stability at Fort Worth therefore reduces one potential source of demand volatility for titanium suppliers.

The effect also extends to other aerospace materials, including nickel-based superalloys, aluminium and specialty steels used across engines, structures and landing systems.

For suppliers, predictable aircraft production is especially valuable because aerospace capacity cannot be adjusted quickly. Qualification requirements, long lead times and specialised equipment make sudden production changes difficult to absorb.

The Metalnomist Commentary

The labor agreement removes a near-term operational risk from one of the world’s most titanium-intensive defense programmes. For the titanium supply chain, stable F-35 production provides valuable demand visibility through a period of rising defense manufacturing requirements.

BaoTi titanium mill products cut as demand weakens in 1H25

BaoTi Titanium

BaoTi titanium mill products output fell as downstream demand cooled, and BaoTi titanium mill products sales also dropped on pricing pressure, pushing first-half revenue lower and squeezing margins despite operational discipline. BaoTi titanium mill products output declined by 4.3% to 16,633t and sales fell 11% to 15,843t as chemical and 3C demand softened, while operating revenue slid 21% to Yn2.967bn on weaker realized prices. Civilian segments underperformed as discretionary spending slowed, although aerospace demand provided only a limited offset in the mix and did not prevent margin compression.

Supply context and market balance

China’s upstream titanium cycle remained resilient, with national titanium ingot output rising 6% to 160,000t in 2024, marking a tenth straight annual increase and highlighting supply firmness. Ti-6Al-4V represented 46% of ingots, commercially pure grades accounted for 43%, and other alloys made up 11%, underscoring a tilt toward higher-spec applications even as some end markets cooled. Major mills produced 172,000t of titanium mill products in 2024, up 8.1% year on year, indicating that supply expansion continued into 2025 and intensified competitive pressure on pricing and product mix.

Outlook and strategic implications

BaoTi is likely to emphasize higher-spec and value-added grades to stabilize margins while weak chemical and 3C demand persists, and disciplined cost control with selective contracting could support cash generation near term. A tighter focus on aerospace, medical, and premium corrosion-resistant alloys may help offset softer civilian segments, but sustained national output growth and firm competitor utilization cap pricing power until demand normalizes.

The Metalnomist Commentary

BaoTi’s near-term lever is mix upgrade, not volume, given broad Chinese supply strength. Watch mill discipline, aerospace call-offs, and any recovery in chemical and 3C orders for the next margin inflection.

BaoTi titanium mill products cut as demand weakens in 1H25

BaoTi titanium

BaoTi titanium mill products output fell as downstream demand cooled, and BaoTi titanium mill products sales also dropped on pricing pressure, pushing first-half revenue lower and squeezing margins despite operational discipline. BaoTi titanium mill products output declined by 4.3% to 16,633t and sales fell 11% to 15,843t as chemical and 3C demand softened, while operating revenue slid 21% to Yn2.967bn on weaker realized prices. Civilian segments underperformed as discretionary spending slowed, although aerospace demand provided only a limited offset in the mix and did not prevent margin compression.

Supply context and market balance

China’s upstream titanium cycle remained resilient, with national titanium ingot output rising 6% to 160,000t in 2024, marking a tenth straight annual increase and highlighting supply firmness. Ti-6Al-4V represented 46% of ingots, commercially pure grades accounted for 43%, and other alloys made up 11%, underscoring a tilt toward higher-spec applications even as some end markets cooled. Major mills produced 172,000t of titanium mill products in 2024, up 8.1% year on year, indicating that supply expansion continued into 2025 and intensified competitive pressure on pricing and product mix.

Outlook and strategic implications

BaoTi is likely to emphasize higher-spec and value-added grades to stabilize margins while weak chemical and 3C demand persists, and disciplined cost control with selective contracting could support cash generation near term. A tighter focus on aerospace, medical, and premium corrosion-resistant alloys may help offset softer civilian segments, but sustained national output growth and firm competitor utilization cap pricing power until demand normalizes.

The Metalnomist Commentary

BaoTi’s near-term lever is mix upgrade, not volume, given broad Chinese supply strength. Watch mill discipline, aerospace call-offs, and any recovery in chemical and 3C orders for the next margin inflection.

Boeing 737 MAX Output Ramp Signals a New Phase for Aerospace Supply Chains

737 MAX

The Boeing 737 MAX output ramp reached an important milestone at the end of 2025. Boeing exited the year producing the 737 MAX at 42 aircraft per month. The company now plans another step up to 47 per month in 2026. As a result, the Boeing 737 MAX output ramp is becoming a stronger signal of production recovery.

This matters because Boeing is moving closer to a more stable delivery profile. The company delivered 447 units in 2025 and expects around 500 deliveries in 2026. Production should reach about 530 units this year, although some 737-10 aircraft still await approval. Therefore, Boeing production recovery is now shifting from backlog repair toward a more normal build pattern.

The improvement also reflects better operating control after several disruptions. Boeing had faced quality issues, regulatory limits, and a labor strike that slowed output. However, the company is now hiring for a new 737 MAX production line in Everett. Consequently, the Boeing 737 MAX output ramp now looks more structural than temporary.

Aerospace Supply Chain Normalization Is Becoming the Next Critical Test

Aerospace supply chain normalization is now central to Boeing’s next step. The company said it plans to reduce excess raw material inventory as output rises to 47 aircraft per month. That process should begin bringing supply conditions back toward historical levels. As a result, Boeing is moving from buffer-stock protection to a more disciplined supply model.

This shift matters across multiple material categories. Boeing’s inventory buildup had weighed on different supply tiers and several commodities. Titanium scrap and titanium ingot prices have already fallen to multiyear lows under that pressure. Therefore, aerospace supply chain normalization could reshape purchasing patterns across the titanium market.

Boeing also plans to manage inventory adjustments carefully. Management said it will reduce excess stock commodity by commodity. That approach aims to protect stability while output rises. Meanwhile, suppliers will need to support higher monthly demand without the same inventory cushion.

737 MAX Titanium Demand and Widebody Growth Add Strategic Weight

737 MAX titanium demand matters even though the narrowbody is not Boeing’s most titanium-intensive model. The bigger strategic signal comes from broader production momentum across Boeing’s portfolio. The company has already moved the 787 Dreamliner to eight aircraft per month. It is also targeting 10 per month later in 2026.

Widebody progress strengthens the materials story further. Boeing said the 777-9 has entered the third phase of type inspection authorization. The company still expects first delivery in 2027 despite a durability issue on the GE9X engine. Because the 777X is Boeing’s most titanium-heavy aircraft family, future certification progress could raise titanium demand visibility.

The challenge, however, is not over. Boeing warned that moving beyond 47 per month toward 52 will be much harder. Supplier performance may become the main constraint at that stage. Therefore, the Boeing 737 MAX output ramp is not only a production story. It is also a test of whether the aerospace supply base can truly normalize.

The Metalnomist Commentary

Boeing’s recovery now depends less on headline demand and more on supply chain discipline. The next gains will come from better supplier performance, not just more assembly capacity. If normalization holds, titanium and other aerospace material markets may finally move out of distortion and back toward healthier demand signals.

IperionX Expands Forging Capacity to Meet Growing Titanium Demand

IperionX

US Titanium Producer Advances Production Capabilities and Technology for Enhanced Efficiency

IperionX, a leading US titanium producer, is significantly expanding its forging capacity to meet the rising demand for high-quality, near-net-shape titanium products. The company has recently commissioned a new 100-metric ton uniaxial hydraulic press and is set to acquire additional critical equipment in late 2024 to further boost production.

These expansions follow IperionX's breakthrough in enhancing its titanium angular powder production process. This innovation aims to increase output beyond its current capacity of 125 metric tonnes per year, with expectations for further growth by late 2025. As a result, the company is positioning itself for greater market demand, particularly from industries seeking specialized titanium products.

IperionX's Hydrogen-Based Technology Brings Efficiency Gains

One of the key factors driving IperionX's expansion is its proprietary hydrogen sintering and phase transformation (HSPT) technology. This cutting-edge process allows the company to produce products with "forged-like" quality while maintaining lower costs compared to traditional ingot-to-forging manufacturing methods. The company's approach offers an efficient, innovative solution to meet the needs of various industries, including aerospace and defense.

IperionX has already started ramping up its pressing and sintering capabilities in 2025, ensuring faster product commercialization. Additionally, the company has significantly increased its prototyping and validation efforts to keep up with growing demand and to fine-tune its production processes.

Looking to the Future: Machining and New Alloys

IperionX is also exploring opportunities to expand its offerings further down the value chain. The company has received increasing interest from industrial and defense sectors for products such as titanium fasteners. As a result, IperionX is evaluating the addition of machining capabilities to better serve these markets.

Additionally, the company is reconfiguring its pilot plant in Salt Lake City, Utah, to focus on producing new titanium alloys, including those incorporating zirconium, tantalum, and niobium. This move reflects IperionX’s commitment to diversifying its product range and strengthening its competitive position in the titanium market.

In conclusion, IperionX is setting the stage for a significant increase in production capacity and product innovation. With its advanced technologies and strategic expansions, the company is poised to meet the surging demand for titanium products in the coming years.