China Aerospace-Grade Titanium Sponge Exports Set to Rise as OEMs Diversify Supply

China Aerospace-Grade Titanium Sponge

China aerospace-grade titanium sponge exports are expected to rise over the next five years as western aerospace supply chains look for additional qualified raw material sources. Chinese producer Chaoyang Jinda Titanium expects international shipments of qualified aerospace-grade sponge to increase from around 1,000t this year to 10,000t by 2030.

The shift reflects a deeper change in the aerospace titanium supply chain. Western aircraft manufacturers and ingot melters are trying to reduce exposure to Russian supply, while aircraft build rates are expected to rise from 2027.

China aerospace-grade titanium sponge is therefore moving from a limited export niche into a potential supply-chain balancing tool. However, tariffs, qualification risk and geopolitical uncertainty will limit how quickly US and European buyers adopt Chinese material.

The opportunity is strongest in standard-quality structural titanium grades. Premium-quality sponge for engine, landing-gear and other critical applications is likely to remain controlled by established suppliers with long qualification histories.

Western Aerospace Buyers Face a Supply-Diversification Challenge

Aerospace-grade sponge demand is expected to recover from 2027 after a weaker 2026 caused by inventory normalisation. Mills have been reducing stocks of semi-finished titanium parts and raw materials, but aircraft production plans point to higher requirements later in the decade.

The timing is important. Airbus and Boeing both carry long aircraft backlogs, creating a decade of production visibility. This forces mills and original equipment manufacturers to look beyond short-term demand swings and secure raw material sources for future build-rate increases.

Western OEMs also continue to reassess Russian titanium exposure. If procurement from Russia declines, the market will need alternative aerospace-qualified sponge to fill the gap. Japan’s Toho Titanium and Osaka Titanium are expanding, while China is preparing to supply more qualified material.

Global approved aerospace-grade sponge supply excluding Russian products is expected to rise from about 74,000t this year to around 91,000t by 2030. Demand is expected to grow at a similar pace, leaving the market sensitive to which suppliers are included in purchasing programmes.

The supply-demand picture changes significantly depending on China and Russia. Excluding both suppliers creates a tighter market. Including them creates more apparent supply availability. This makes qualification and geopolitical acceptability just as important as physical capacity.

Some US ingot producers began qualifying Chinese titanium sponge in 2024. US imports from China rose to a 10-year high of 1,069t that year, showing that buyers were willing to test Chinese material when diversification pressure increased.

However, imports fell to 155t last year and no Chinese sponge imports were reported in January-February 2026. Tariff volatility, high mill inventories and policy uncertainty discouraged further purchasing.

This shows the main barrier for China aerospace-grade titanium sponge. Aerospace qualification requires multi-year commitments, stable documentation, repeatable quality and customer confidence. Buyers will not qualify a new source quickly if they fear trade rules could change again.

Titanium is exempt from the latest 10% US tariff, and overall duties have fallen back to 40% from 60%. But the rate itself is not the only issue. For aerospace buyers, volatility can be more damaging than the actual tariff level.

A mill can absorb or price a known tariff. It cannot easily build a long-term qualification strategy around unpredictable policy. This is why US buyers may limit Chinese sponge procurement to 15-20% of requirements, even if the material is technically acceptable.

Europe and Asia-Pacific may offer more immediate export channels. China already supplies aerospace-grade sponge to buyers in those regions, supporting shipments even when US demand is limited.

Capacity Expansion Could Change the Titanium Sponge Balance

China is preparing a large wave of aerospace-grade sponge capacity additions. Several major projects are scheduled to come on line soon, with combined new capacity of around 110,000 t/yr.

The scale is unprecedented. The planned additions exceed the combined existing capacity of Japan’s Toho and Osaka Titanium, Kazakhstan’s Ust-Kamenogorsk Titanium and Magnesium Plant, and Saudi Arabia’s ATTM.

China’s expansion is driven by two demand streams. Domestic aerospace demand is rising from the Comac C919 programme and military aircraft production. At the same time, producers expect higher export demand as western OEMs diversify away from Russia.

China’s titanium mill product demand already has a meaningful aerospace base. Aerospace applications accounted for about 20% of China’s titanium mill product demand in 2025, or roughly 31,280t. The chemicals industry remained the largest segment at 48%.

The domestic base gives Chinese sponge producers a stronger platform for quality improvement. Aerospace production experience matters because sponge qualification depends on consistency over time, not only nameplate capacity.

Still, some market participants question whether all new capacity can secure international aerospace qualification. New lines may need years of operating history before western melters and OEMs accept material for aircraft applications.

This is a critical distinction. China may have large physical capacity, but aerospace supply depends on approved, audited and repeatable production. Capacity alone does not guarantee market access.

Price competitiveness may support adoption. Domestic China aerospace-grade sponge prices have recently held firm at 55,000-57,000 yuan/t ex-works because of cost pressure. That remains competitive against some western supply routes, especially if buyers need alternative non-Russian material.

However, qualification is likely to split the market by application. Standard structural titanium grades are more likely to accept Chinese sponge over time. These grades support airframes and less critical structural components where qualification remains strict but less restrictive than engine-grade applications.

Premium-quality sponge will be harder to penetrate. Engine, landing-gear and other demanding aerospace uses require deeper qualification, tighter chemistry control and stronger confidence from prime contractors and tier suppliers.

Airbus’ titanium demand outlook adds another layer. The A350 is a high titanium-bearing platform, with titanium representing around 15% of aircraft weight. As A350 production rises toward 2027 and 2028, titanium demand visibility should improve across the supply chain.

That demand pull could make Chinese material more attractive if western supply tightens. But buyers will still balance cost, qualification, geopolitics and supply security.

For Chinese producers, the path is clear but difficult. They must prove consistent aerospace-grade quality, build long-term customer trust, manage export documentation and navigate trade policy risk.

For western OEMs, the decision is strategic. China aerospace-grade titanium sponge could reduce Russia exposure and improve supply flexibility. But it also introduces another geopolitical dependency at a time when aerospace and defence supply chains are under closer scrutiny.

The most likely outcome is partial adoption. Chinese sponge may become a growing supplement for standard-quality structural grades, while established Japanese, Kazakh, Saudi and other qualified suppliers remain central to premium aerospace applications.

The Metalnomist Commentary

China aerospace-grade titanium sponge will become harder for western aerospace supply chains to ignore as aircraft build rates rise and Russian exposure narrows. The decisive issue is not capacity, but whether Chinese producers can convert new output into trusted, qualified and politically acceptable supply.

Aerospace-grade titanium sponge plant: Chaoyang Jinda targets 20,000 t/yr expansion

Jinda Titanium

Chaoyang Jinda will build an aerospace-grade titanium sponge plant in Chaoyang. The company sized the project at 20,000 t/yr. As a result, the aerospace-grade titanium sponge supply base in China will expand.

The aerospace-grade titanium sponge plan follows the firm’s IPO review approval on 5 December. The company aims to raise 405mn yuan for capacity growth. Meanwhile, it did not disclose a construction timeline.

IPO funding and capacity rank signal a bigger domestic push

The new titanium sponge plant lifts Jinda’s capacity to 50,000 t/yr from 30,000 t/yr. Therefore, the company would become China’s fourth-largest sponge producer. It would rank behind Xinjiang Xiangrun, Yunnan National Titanium, and Pangang Titanium.

Titanium sponge is the key feedstock for titanium mill products. However, aerospace buyers demand tighter quality controls and stable supply. As a result, aerospace-grade titanium sponge capacity expansion can reshape supplier qualification cycles.

Aerospace demand drives titanium mill products and sponge utilization

China’s aerospace sector led titanium mill product consumption growth in 2024. Total aerospace consumption reached 32,193t, or 21.3% of national demand. Therefore, upstream producers now chase aerospace-grade titanium sponge positioning.

Jinda produced 27,400t of titanium sponge in January–November. Output rose 1.3% year on year. Meanwhile, the new plant could shift its mix toward higher-spec aerospace-grade titanium sponge.

The Metalnomist Commentary

Aerospace-grade titanium sponge capacity adds leverage in a tight qualification market. Therefore, the real test will be consistent chemistry and oxygen control. However, rapid capacity growth can pressure margins if demand cools.

China Titanium Sponge Exports Rise in March as Asian Buyers Support Demand

China Titanium Sponge

China titanium sponge exports rose year on year in March, supported by stronger buying interest from South Korea, India, Vietnam and Slovenia. Chinese customs data showed exports reached 453t during the month, up 8.6% from 417t a year earlier.

China titanium sponge exports still declined by 7.4% from February’s 489t, showing that overseas buying remained selective. Some buyers were not under immediate pressure to purchase Chinese material because spot supply was sufficient.

China titanium sponge exports totalled 1,535t in January-March, down 5.7% from a year earlier. The decline reflected weaker buying from major consumers including Japan, South Korea and the US.

The data show a titanium sponge export market that is recovering unevenly. Asian demand helped March shipments, but inventory drawdowns, delayed purchasing and weaker aerospace-linked orders continued to limit broader export momentum.

Japan, South Korea and US Demand Weaken in First Quarter

Japan remained the largest destination for Chinese titanium sponge in January-March, receiving 347t. However, shipments fell by 37% from 548t a year earlier.

The decline was mainly caused by delayed purchasing from a major Japanese consumer. Purchases are expected to resume in May, which could support later-quarter export flows.

South Korean imports from China also fell. Shipments dropped by 33% to 172t as some buyers slowed procurement after failing to secure downstream aerospace original equipment manufacturer orders.

This matters because aerospace demand remains one of the most important drivers of higher-grade titanium sponge consumption. When downstream aerospace orders are delayed, sponge buyers often reduce spot intake and work through inventories.

US demand was almost absent in the first quarter. China exported only 0.2t of titanium sponge to the US, down 99.8% from a year earlier, as US consumers continued drawing down inventories.

The US result highlights the effect of inventory cycles and trade uncertainty. Even when Chinese material remains available, buyers may delay purchases if they have sufficient stock or face qualification, tariff and policy risk.

Export Prices Track Higher Domestic Sponge Market

Chinese 99.7% grade titanium sponge export prices averaged $6.70/kg fob China in January-March. This was up 1.5% from $6.60/kg a year earlier.

The increase tracked higher domestic titanium sponge prices. Export pricing therefore reflected cost support in China rather than a broad surge in overseas demand.

The modest price rise also shows that the market remains balanced. Chinese suppliers have support from domestic costs, but overseas buyers are still cautious and selective.

For global titanium supply chains, the key issue is not only volume. The quality, qualification status and end-use requirements of sponge matter, especially for aerospace and high-performance industrial applications.

China’s titanium sponge exports remain important for regional buyers in Asia and Europe. However, demand from aerospace-linked customers will depend on downstream order visibility, inventory levels and qualification confidence.

If Japanese buying resumes in May and South Korean aerospace-related demand improves, Chinese exports could recover further. But weak US flows suggest that trade and inventory factors will continue to limit upside in some markets.

The Metalnomist Commentary

China titanium sponge exports show a market supported by regional buying but still constrained by aerospace order timing and inventory drawdowns. The next signal will come from whether Japanese and South Korean buyers return with stronger qualified-material demand in the second quarter.

ATTM Titanium Sponge Operations Continue Despite Middle East Freight Risk

ATTM

ATTM titanium sponge operations remain normal despite rising logistics pressure from the war in the Middle East. The Saudi Arabian titanium sponge producer has reported no direct operational impact and does not expect material disruption to exports at this stage.

The company is a joint venture between Saudi group AMIC and Japan’s Toho Titanium. Its plant is located in Yanbu, on Saudi Arabia’s Red Sea coast, giving the facility strategic access to international titanium feedstock and export routes.

ATTM titanium sponge operations matter because the company supplies aerospace-grade titanium sponge to major Western markets, including the US, UK, France, and Italy. It also supplies ferro-titanium grades to Estonia, with smaller volumes shipped elsewhere.

Titanium Supply Chain Faces Freight and Feedstock Exposure

Regional freight markets have become more volatile as conflict disrupts shipping routes and energy-linked supply chains across the Middle East. Several aluminium production facilities have already faced production pressure because they could not secure imported feedstocks, energy supplies, or export access.

ATTM said it is actively managing logistics and does not anticipate material export disruption. This is important because Saudi Arabia imports most of its titanium ore and concentrate feedstocks from Mozambique and Australia.

ATTM titanium sponge operations therefore depend not only on plant performance, but also on inbound ore logistics and outbound sponge shipment routes. Any sustained disruption in freight availability, insurance costs, or port access could still affect titanium supply timing even if production remains stable.

Aerospace Sponge Output Remains Strategically Important

ATTM produced 12,000t of titanium sponge in 2025, compared with a nameplate capacity of 15,600 t/yr. That makes the company a meaningful non-Russian and non-Chinese titanium sponge source for aerospace and industrial customers.

The company’s relationship with Toho Titanium also strengthens its technical position. Aerospace-grade sponge requires strict control over chemistry, trace elements, and production consistency, making qualification and supplier reliability more important than spot-market availability.

For Western aerospace supply chains, stable ATTM titanium sponge operations provide reassurance during a period of geopolitical stress. However, the situation also highlights a broader vulnerability: titanium sponge supply remains concentrated in a small number of qualified producers, while feedstock logistics depend on long-distance maritime routes.

The Metalnomist Commentary

ATTM’s stability is positive for aerospace titanium buyers, but the real risk sits in logistics rather than furnace operations. Titanium sponge customers should treat Middle East freight disruption as a supply-chain risk that can emerge before production itself is affected.

Aerospace-grade titanium ingot order strengthens India’s space titanium supply chain

PTC Industries

India’s aerospace-grade titanium ingot order signals faster domestic capability for space programs. PTC will execute this aerospace-grade titanium ingot order for ISRO’s Vikram Sarabhai Space Center. As a result, the deal accelerates India’s push for reliable 6Al-4V capacity.

From titanium sponge to 6Al-4V ingots for space hardware

The contract centers on converting 40 tonnes of Grade 1 titanium sponge into 6Al-4V ingots. PTC will use double vacuum arc remelting to hit aerospace consistency. Meanwhile, its Aerolloy unit already commissioned VAR and VIM furnaces in September.

PTC also positions the order as a stepping stone to wider aerospace qualification. Therefore, the company can translate space-grade deliveries into broader defense demand. The aerospace-grade titanium ingot order also validates its process route for premium alloys.

PAM scale-up expands scrap flexibility and alloy development

Aerolloy completed installation of a plasma arc melting furnace in Lucknow. The PAM line targets 600 tonnes per year of titanium ingots. Meanwhile, Aerolloy plans trial loads as commissioning begins.

The PAM furnace improves yield control when using turnings and smaller scrap forms. However, scrap sourcing still requires strict segregation and chemistry discipline. Therefore, PAM plus VAR can support smaller-batch “exotic” alloy programs with tighter specifications.

PTC is also building a fully integrated titanium platform across the value chain. The company aims to add upstream sponge and expand casting and machining services. Meanwhile, supply agreements with aerospace primes support longer-term demand visibility.

The Metalnomist Commentary

This order matters because it links space procurement to scalable industrial melting capacity. However, qualification depth will decide whether PTC wins recurring engine and airframe work. The winners will pair melting scale with repeatable metallurgy and inspection throughput.

Global Aerospace-Grade Titanium Sponge Supply Expands Despite Japanese Slowdown

Titanium Sponge

Higher utilization in Kazakhstan and Saudi Arabia offsets Japan’s decline as China eyes industrial market growth

Global Titanium Sponge Output Rises in 2024

Titanium sponge production from aerospace-approved suppliers grew in 2024, reaching 89,000 metric tons — a 6% increase from 2023. This rise came despite a production decline in Japan, which was balanced by higher capacity utilization in Kazakhstan and Saudi Arabia. The U.S. Geological Survey (USGS) and industry data confirm this upward trend, driven primarily by strategic expansion in the Middle East and Central Asia.

Japan's production fell to 55,000t in 2024, down from 57,000t in 2023. Inventory adjustments by domestic aerospace consumers were the primary cause. In contrast, Saudi Arabia's AMIC-Toho Titanium Metal ramped up output to 15,000t, nearing its 15,600 t/year capacity. Kazakhstan also maintained high utilization levels, strengthening its role as a stable sponge supplier for critical aerospace applications.

China Expands Industrial Market Footprint

While China’s titanium sponge remains unqualified for aerospace, its influence in industrial markets surged in 2024. Chinese production held steady at 220,000t, but capacity climbed to as much as 320,000 t/year, according to market participants. Japan’s imports of unwrought titanium from China rose sharply — from 451t in 2023 to 1,198t in 2024 — suggesting increased acceptance of Chinese sponge and ingot in industrial-grade production.

China’s growing presence is reshaping competition, particularly in Japan, where CP-grade metal demand dominates. Although Chinese sponge lacks aerospace certification, Metalnomist understands that select U.S. buyers are testing small volumes for future qualification — despite ongoing tariff uncertainties. The U.S. imported 1,068t of sponge from China in 2024, up from 154t the year before.

U.S. Aerospace Demand Softens Amid Boeing Constraints

U.S. titanium sponge imports from Japan declined in 2024 to 27,692t, down from 31,387t in 2023. This contraction reflects softer demand from American ingot melters due to lower-than-expected build rates for Boeing’s 787 Dreamliner and 737 Max programs. Persistent supply chain challenges further impacted intake, signaling a temporary slowdown in titanium conversion activity for aerospace.

Despite this, global titanium sponge markets remain dynamic. Kazakhstan and Saudi Arabia continue to play a vital role in balancing supply, while China's push into the industrial sector could eventually redefine global sourcing strategies.

US titanium scrap-sponge ratio set to shift as melters chase margins

Titanium Scrap

The US titanium scrap-sponge ratio is poised to shift as melters chase cheaper inputs in 2026. Premium titanium sponge prices and weak downstream demand are squeezing margins and forcing producers to reconsider melt mixes. As a result, the US titanium scrap-sponge ratio could move decisively toward higher scrap utilization across many grades.

Furnace expansions support higher scrap utilization

Capacity expansions at ATI, Perryman and Timet will give melters more room to adjust the US titanium scrap-sponge ratio. Their projects are expected to add nearly 30,000 t/yr of ingot production capacity once fully ramped, according to Metalnomist estimates. Consequently, scrap utilization capacity could rise by 22pc to 111,215t in 2026 compared with 2024, ELG Utica Alloys’ Nick Corby told the International Titanium Association conference.

However, not every alloy can fully pivot away from sponge, because certain grades still require premium sponge for purity. Grade 5 (6Al-4V) ingot can be melted from 100pc scrap, which encourages a higher US titanium scrap-sponge ratio when prices favor recycled inputs. Importantly, melters can alter the scrap and sponge ratio without major downtime, allowing them to track raw material prices and supply conditions in real time.

Meanwhile, destocking in commercial aerospace could cap the practical impact of these technical options. Boeing and Airbus are signalling another year of subdued orders for ingot and milled products as they normalise inventory. This means melters already grappling with weaker demand may push deliveries out or no-quote dealers on certain grades, even as the US titanium scrap-sponge ratio tilts structurally toward scrap.

Global scrap flows deepen market distortions

Scrap sourcing dynamics will play a critical role in how far the US titanium scrap-sponge ratio can shift. The US accounts for around 95pc of global consumption of aerospace-grade titanium scrap, making it the natural sink for high-grade revert. Imports are crucial, covering more than half of US raw material needs and bridging gaps in domestic generation.

Historically, Europe supplied much of this scrap, reflecting its strong base of forging and machining operations. Long-standing supply agreements and buy-back schemes cemented a circular flow of titanium between the two regions. However, shifts in downstream processing toward Asia are eroding Europe’s share, even as titanium activity in countries like China accelerates.

China is on track to increase global titanium scrap exports by 64pc in 2025 to 5,874t, with most of that likely moving into the US. Officially, the US has only imported 434t of titanium scrap from China this year, US Commerce Department data show. Yet market participants say Chinese-origin scrap often reaches the US via other Asian countries to circumvent 25pc tariffs, complicating visibility.

As a result, the supply chain looks “inconsistent”, with scrap availability not matching lower generation rates caused by delayed aircraft build schedules and OEM stockpiles. Corby noted that imports are expected to exceed exports by 19,460t this year, the widest gap since records began. At the same time, European ferro-titanium consumers face weak steel demand and index-driven price pressure, cutting their appetite for scrap and pushing more material toward US buyers.

The Metalnomist Commentary

The evolving US titanium scrap-sponge ratio highlights how price signals, furnace investments and trade flows interact across the titanium ecosystem. For melters, flexibility in melt mixes is becoming a strategic hedge against stubborn sponge prices and volatile aerospace demand. For scrap generators and intermediaries, rising US dependence and opaque routing via Asia could keep differentials wide — and margins attractive — well into the next aerospace upcycle.

PTC Industries Secures Titanium Sponge Supply Deal with ATTM

PTC Industries

Strengthening India's Aerospace Titanium Supply Chain

Indian manufacturer PTC Industries has entered into a strategic titanium sponge supply agreement with Amic Toho Titanium Metal (ATTM) of Saudi Arabia. This partnership follows PTC's recent commissioning of a vacuum arc remelt (VAR) furnace, a move aimed at boosting India's titanium ingot production capacity.

Expanding Titanium Ingots Production in India

PTC’s subsidiary, Aerolloy Technologies, operates the newly launched VAR furnace, which boasts a 1,500 t/yr melting capacity. This advanced facility can produce aerospace-grade titanium ingots, a critical material for aviation, defense, and high-performance industries. The agreement with ATTM ensures a stable supply of titanium sponge, a vital raw material for ingot production.

Titanium sponge is melted alongside titanium scrap and master alloys, such as aluminum-vanadium, to form high-quality titanium ingots. However, India's domestic supply of titanium scrap remains limited, making imports from regions like Europe and Asia essential for a balanced melt mix.

ATTM’s Aerospace-Grade Titanium Expertise

ATTM, one of only four titanium sponge producers approved for aerospace applications, operates with a 15,600 t/yr nameplate capacity. This positions the company as a crucial supplier for PTC’s ambitions to expand India’s aerospace and high-performance titanium alloy capabilities.

By securing this agreement, PTC enhances its ability to meet the growing demand for high-quality titanium products, reducing reliance on fluctuating global scrap markets. The move aligns with India's vision of strengthening its aerospace and defense supply chains, reinforcing the nation's push for self-reliance in critical materials.

China's Titanium Sponge Production to See Significant Expansion Amid Demand Growth

China's Titanium Sponge

China's titanium sponge production capacity is set to experience a major boost, potentially reaching between 300,000 and 500,000 tonnes per year over the next three to five years, according to An Zhongsheng, secretary-general of the China Nonferrous Metals Industry Association's titanium zirconium and hafnium branch (CNIA-Ti). This expansion is expected to be driven by increased demand across various sectors including aerospace, marine engineering, chemical production, computer, communication and consumer electronics (3C), daily necessities, and air conditioning, as reported at the China and CIS Titanium Industry Development Forum held in Xi'an, Shaanxi province.

Global civil aviation demand, recovering from the impacts of the Covid-19 pandemic, has put strain on aviation-grade titanium sponge supplies. An emphasized that while the aerospace industry is recovering, industrial sectors are propelling China's titanium market with consistent growth in recent years.

Currently, China's titanium sponge production capacity hovers around 300,000 tonnes per year. In the broader market, titanium's growing use in civilian products is anticipated to be a significant growth catalyst for the Chinese titanium industry.

Although global demand for titanium in the medical industry has surged, Chinese demand in this sector has been hampered by healthcare reforms promoting the use of cost-effective materials. Despite this, prices for titanium sponge are projected to remain relatively stable, enhancing its appeal across a range of applications. An Zhongsheng reassured industry stakeholders that China’s domestic supply of titanium sponge will meet future demands due to planned capacity expansions.

The anticipated rapid growth in titanium sponge production marks a transition for titanium from a rare metal to a more commonly used material, according to An. In the first half of this year, China produced 123,500 tonnes of titanium sponge, according to CNIA-Ti data.

Nevertheless, China continues to rely on imports for approximately 35-40% of its titanium ores and concentrates, reflecting its position in the global supply chain. Last year, global production of titanium ore and concentrate amounted to 8.75 million tonnes (t) of titanium dioxide equivalent, with China contributing 37%, followed by Mozambique (18%), South Africa (11%), and Canada (6%).

In the realm of titanium dioxide production, China led with 55% of global output in 2023, maintaining growth through domestic capacity expansions. Additionally, the world's titanium sponge production rose by 29% to 347,000 tonnes in 2023, with China’s output surging from a 25% share in 2022 to a dominant 63%. Russia, Japan, and Saudi Arabia also witnessed increases in their titanium sponge output, while Ukraine reported zero production.

For titanium mill products, global production in 2023 reached 248,000 tonnes, with China accounting for a commanding 64%, trailed by the United States (14%), Russia (13%), Japan (6%), and Europe (3%).

Safran Non-Russian Titanium Supply Secured as Aerospace Procurement Shifts Further West

Safran, Olivier Andries

Safran non-Russian titanium supply is now fully secured, marking a major shift in aerospace titanium procurement. The French aerospace manufacturer said it has completed its transition away from Russian producer VSMPO-Avisma. This move includes alternative sources for billets and landing gear forgings. As a result, Safran non-Russian titanium supply has become a clear example of titanium supply chain diversification in the aerospace sector.

This change matters because aerospace-grade titanium sourcing is slow and difficult to replace. Certification rules are strict, large forging capacity is limited, and long-term contracts shape most procurement decisions. Therefore, Safran non-Russian titanium supply reflects years of industrial planning rather than a quick purchasing adjustment.

Aerospace Titanium Procurement Is Moving Away From Russian Dependence

Aerospace titanium procurement has been moving steadily away from Russian dependence since early 2022. Safran has now completed that shift, while other major manufacturers are still reducing exposure. Airbus, for example, has continued receiving Russian titanium under existing contracts while building alternative sourcing options. Consequently, Safran non-Russian titanium supply gives the market one of the clearest completed examples of western supplier replacement.

This transition also matters because Russian titanium has not been fully blocked across all western markets. The EU did not sanction Russian-origin titanium, and US measures remained limited to export licensing. Even so, aerospace manufacturers have increasingly chosen to diversify supply for strategic and political reasons. Therefore, aerospace titanium procurement is now being shaped by resilience as much as price or availability.

Titanium Supply Chain Diversification Is Reshaping the Competitive Map

Titanium supply chain diversification is also changing the wider industry balance. Safran’s exit adds more pressure to VSMPO-Avisma’s international order book at a time when Russian titanium volumes are already under strain. Lower sponge production and workforce adjustments suggest that the loss of western business is becoming more visible. As a result, Safran non-Russian titanium supply is not only a procurement story. It is also a competitive signal.

The broader market is now shifting toward western and allied suppliers with aerospace-grade capability. Large forgings, billet, and flat-rolled titanium products are becoming more strategically important across the supply chain. That means titanium producers with certified aerospace capacity may gain stronger long-term relevance. Meanwhile, OEMs are showing that supply security now carries more weight in purchasing decisions.

The Metalnomist Commentary

Safran’s move matters because titanium supply is no longer judged only by technical qualification and price. It is now judged by geopolitical resilience as well. The bigger takeaway is clear: aerospace titanium procurement is being redrawn around trusted capacity, and that shift will likely continue across the industry.

LB Titanium Dioxide Output Falls as Sponge and Battery Materials Expand

LB Titanium

LB titanium dioxide output fell in 2025 as weaker prices, slower demand and rising trade barriers pressured the global pigment market. China’s largest titanium producer reported titanium dioxide production of 1.28mn t, down 1.5% from a year earlier.

LB titanium dioxide output declined even as sales edged higher to 1.26mn t. Domestic sales accounted for 45% of volumes, while international sales made up 55%, showing that overseas markets remain critical to the company’s TiO2 business.

LB titanium dioxide output came under pressure from structural oversupply. New capacity entered the market, prices weakened and several domestic producers cut operating rates to protect margins.

The company also pointed to anti-dumping duties imposed by the EU, Brazil, Saudi Arabia and the Eurasian Economic Union, along with higher US tariffs on Chinese material. These measures have fragmented trade flows and made the global titanium dioxide market more difficult for Chinese exporters.

Titanium Sponge Offers a Stronger Counterweight

LB’s titanium sponge business moved in the opposite direction. Titanium sponge output rose by 2.3% on the year to 71,300t, while sales increased by 0.9% to 67,500t.

The stronger sponge result matters because titanium sponge sits closer to aerospace, industrial titanium mill products and high-performance alloy supply chains. It gives LB a more diversified titanium platform beyond pigment markets.

Titanium sponge prices were also firmer. Domestic 99.7% grade sponge prices averaged 49,665 yuan/t ex-works in 2025, up from 48,270 yuan/t a year earlier.

LB has 80,000 t/yr of titanium sponge capacity, the largest globally. That scale gives the company a major position in a market where feedstock security, product quality and downstream demand from titanium processors remain strategically important.

Titanium concentrate output fell by 3% to 1.45mn t, but LB did not sell concentrate externally. All concentrate was consumed internally to produce titanium dioxide and titanium sponge.

This internal use highlights the company’s integrated titanium value chain. LB can direct feedstock toward different downstream products depending on market conditions, although weak TiO2 demand still affects overall profitability.

Iron ore concentrate output fell more sharply, dropping by 18% to 3.04mn t. Sales decreased by 2.1% to 2.94mn t, showing softer performance in another mineral by-product stream.

Iron Phosphate Growth Signals Battery Materials Diversification

LB’s battery materials business showed much stronger momentum. Iron phosphate output jumped by 72% to 97,600t, while sales rose by 59% to 96,000t.

The growth was driven by firm demand from the lithium-ion battery sector. Iron phosphate is a key precursor for lithium iron phosphate cathode materials, which are widely used in electric vehicles and energy storage systems.

This diversification is strategically important. Titanium dioxide remains LB’s largest product line, but the pigment market is facing oversupply, trade restrictions and weaker pricing. Battery materials offer a different growth channel tied to China’s expanding LFP ecosystem.

LB has 100,000 t/yr of iron phosphate capacity and 50,000 t/yr of LFP capacity. It also has 25,000 t/yr of graphite anode capacity and 50,000 t/yr of graphitisation capacity.

That product base positions LB across titanium, zirconium and battery materials. The company is no longer only a titanium dioxide producer, even though it remains the world’s largest TiO2 producer with 1.51mn t/yr of capacity.

The 2025 results show a clear split in the business. Titanium dioxide is under pressure from oversupply and trade action. Titanium sponge is holding stronger. Iron phosphate is growing with battery demand.

For LB, the industrial challenge is to manage a mature pigment business while expanding higher-growth materials platforms. Its integrated mineral base gives it flexibility, but market conditions across TiO2, sponge and battery materials are moving in different directions.

The Metalnomist Commentary

LB’s results show how Chinese titanium producers are moving beyond pigment exposure into sponge and battery materials. The strategic value lies in feedstock integration, because companies that can shift internal mineral flows between TiO2, titanium sponge and battery precursors will be better positioned in volatile markets.

Titanium Exempt from New US Reciprocal Tariffs Amid Broader Aerospace Uncertainty

Titanium Ingot

Titanium Scrap and Alloys Dodge Latest Tariff Wave, but Market Unease Persists

Titanium and its derivatives, including scrap and ferro-titanium, were notably exempted from the latest round of US reciprocal tariffs announced on April 2. Annex II of President Donald Trump’s executive order outlined the list of exemptions, sparing various nonferrous metals, including titanium, from additional duties.

However, existing tariffs on titanium products remain unchanged. These include a 60% duty on Chinese titanium sponge and a 15% duty on unwrought titanium from Japan, Kazakhstan, and Saudi Arabia. While titanium scrap imports from the EU and UK are also exempt, pre-existing duties—such as the 20% tariff on Chinese titanium added in March—still apply.

Meanwhile, concerns linger about supply disruptions, particularly in vacuum-grade titanium scrap. The US depends heavily on EU and UK sources to meet demand for ingot melting in aerospace-grade production.

Aerospace Industry Caught in the Crossfire of Uncertain Trade Measures

The aerospace supply chain could still face ripple effects, especially concerning finished parts, components, and jet engines. Major OEMs such as Airbus, Boeing, and Rolls-Royce remain cautious, stating that they are assessing the impact of the new tariffs.

Jet engines like CFM’s Leap-1A and 1B, which power the Airbus A320neo and Boeing 737 Max, span a US-French supply chain, raising questions about the impact of cross-border tariffs on subcomponents. Landing gear systems produced by Safran for the Boeing 787 and turbine modules from GE in the US to France further complicate the situation.

While titanium producers currently report no impact on OEMs for titanium-based parts, the ambiguity surrounding composite materials and mixed-alloy components could lead to future disruptions.

China's Tariff Retaliation Raises Stakes for US Aerospace Exports

In response, China has imposed a 34% tariff on all US imports, with no exemptions, escalating the trade conflict. This will impact US titanium exports to China—totaling 1,300t in 2024—mainly in bars, rods, and wire, as well as aerospace components vital to Comac’s C919 jet program.

China’s C919 relies on US-sourced Leap-1C engines, avionics from Honeywell Aerospace, GE Aerospace, and Collins Aerospace, making it vulnerable to retaliatory tariffs.

Although China sources the majority of its titanium domestically, these duties highlight the fragile interdependence of global aerospace production.

The Metalnomist Commentary

Titanium’s tariff exemption provides momentary relief to US aerospace and scrap processors, but the real uncertainty lies in composite supply chains. As the US and China entrench their trade defenses, aerospace firms must prepare for further regulatory fragmentation. Strategic stockpiling, diversified sourcing, and diplomatic engagement will define resilience in the next phase of industrial policy shifts.

China titanium sponge market 2026 faces pressure from capacity surplus and export controls

China Titanium Sponge

China titanium sponge market 2026 will face renewed pricing and margin pressure as capacity keeps rising. China titanium sponge market 2026 will also feel weaker chemical demand and tighter export channels. Therefore, titanium sponge capacity surplus could widen even if output growth slows.

China is set to lift titanium sponge output to about 260,500t in 2025 from 256,000t in 2024. This marks the tenth straight annual increase since 2016. Meanwhile, China’s production share rises to about 72% as global supply concentrates further.

Titanium sponge capacity surplus widens as new plants ramp up

Titanium sponge capacity surplus is the central risk entering 2026. China’s sponge capacity is forecast to reach about 441,000 t/yr in 2026 from 341,000 t/yr in 2025. As a result, the sector’s existing surplus could expand sharply as another 100,000 t/yr arrives.

Large private producers continue to drive the buildout, including Sichuan Anning, Chaoyang Jinda, and Xinjiang Xiangrun. However, demand growth does not match the pace of commissioning. Therefore, producers may compete harder on price, payment terms, and product grading.

China titanium export controls squeeze mill demand and change product mix

China titanium export controls on certain mill products remain a key downstream constraint. The controls took effect on 1 July 2024 and tightened again this year. Meanwhile, some mills reportedly paused exports after licence uncertainty, which reduced sponge buying.

Chemical demand remains the biggest swing factor for titanium consumption. The chemical sector held the largest share of domestic mill product use in 2024. However, chemical investment has softened as large upgrade cycles fade and fewer mega-projects start.

Titanium also faces substitution in lower-end chemical applications. Buyers increasingly use high-performance stainless steels and engineered plastics in milder environments. As a result, mills may pivot faster toward aerospace alloys and hydrogen equipment demand.

The Metalnomist Commentary

Oversupply will test who controls costs and who controls offtake. However, export constraints will keep reshaping where sponge flows and which grades clear. Off-grade sponge exports could quietly rise if overseas ferro-titanium buyers chase value.

Titanium Exempted from US Tariffs: Aerospace Industry Impact Remains Unclear

Titanium

New US Tariff Exemptions for Titanium Could Affect the Aerospace Supply Chain

On April 2, 2025, US President Donald Trump announced new tariffs on several foreign imports, including an exemption for titanium, titanium scrap, and ferro-titanium. While the exemption helps protect titanium trade, the broader implications for the aerospace industry remain uncertain.

Titanium Exemption and Its Effects

The US tariffs announced include a list of exemptions, with titanium in its various forms being spared. However, other metals like hafnium, molybdenum, vanadium, nickel scrap, and aluminum scrap were not exempted. The new tariff scheme does not affect pre-existing duties on Chinese titanium products, including a 20% duty on titanium products from China, which has been in place since March 4, 2025. Despite the exemption for certain forms of titanium, Chinese titanium sponge imports will still be subject to a 60% duty, which remains unchanged.

Additionally, imports of unwrought titanium from Japan, Kazakhstan, and Saudi Arabia will still face a 15% tariff, though efforts to remove this tariff for sponge imports are underway. For US titanium scrap imports, particularly from the EU and UK, which make up over half of the US intake, the tariff exemption is crucial. Without it, US scrap dealers, processors, and consumers would face substantial challenges, as the US does not produce enough vacuum-grade titanium scrap domestically to meet demand.

Aerospace Industry and Supply Chain Impact

While the titanium exemption provides relief for many manufacturers, the broader impact of the tariffs on the aerospace industry is still unclear. Aerospace manufacturers are uncertain about the tariff's effects on finished parts, components, and engines, particularly regarding supply chains that involve cross-border production of engine parts like the Leap-1A and Leap-1B engines for the A320neo and Boeing 737 Max.

Canada and Mexico were excluded from the new US tariffs, alleviating concerns for companies like Bombardier, Airbus, RTX, and Heroux-Devtek, which operate in those regions. Still, some titanium producers believe the situation could change rapidly, as it is difficult to define the boundaries between parts made from titanium and assembled components that use other materials, such as nickel-based alloys or aluminum.

China’s 34% Tariff on US Exports

In response to US tariffs, China has imposed a 34% tariff on all US imports, which will affect titanium imports from the US. Despite importing limited amounts of titanium from the US, China still relies on US imports for critical aerospace components, including parts for its C919 aircraft. The C919 uses the CFM Leap-1C engine, which is assembled in both the US and France.

Titanium Prices Hold as Inventory Drawdown Limits Spot Buying

Titanium

Titanium prices held steady in Europe and the US over the past month as mills, forgers and OEMs continued to rely on inventories instead of placing larger new orders. The market remained under pressure from surplus melt capacity and slower demand for standard-quality titanium used in airframe structures.

US 6Al 4V ingot prices stayed at $10-10.75/lb fob domestic producer, with some spot purchases still taking place near $10/lb. Mills kept offers broadly stable below $11/lb, although at least one producer quoted above that level for larger orders.

Titanium prices also remained flat in Europe, with 6Al 4V ingot assessed at $19.50-21.50/kg du Rotterdam. Forgers continued to work through high inventories of mill products before committing to new intermediate material purchases.

Aerospace Inventory Drawdown Keeps Pressure on Standard Titanium

Aerospace demand remained uneven as Boeing and Airbus continued inventory drawdowns. This primarily affected standard-quality titanium used in airframe structures, where consumption has been slower than in higher-specification applications.

Surplus melt capacity kept pressure on ingot prices. Market participants said lead times for basic Grade 5 ingot were around eight to 10 weeks, while some producers could likely deliver within six weeks if pushed.

Demand was stronger in premium-quality ingot for engine applications. Defence and medical markets also showed pockets of resilience, giving titanium producers some support outside standard aerospace structures.

Sponge and Commercially Pure Titanium Markets Stay Stable

Titanium sponge contract prices also remained stable. TG100 grade sponge long-term contract prices were assessed at $11-12/kg du Rotterdam in March, in line with standing 2026 contracts.

Saudi Arabian producer ATTM continued to operate normally, despite wider Middle East conflict risks and disruption around the Strait of Hormuz. The conflict has affected regional freight routes and disrupted some metals supply chains, but no direct titanium sponge impact was reported.

Commercially pure titanium ingot prices were also unchanged. CP Grade 1 ingot held at $12-14/kg cif main port, while CP Grade 2 ingot stayed at $11.10-12/kg cif main port.

Buyers avoided finalising new contracts as they focused on reducing stocks. However, inventory clearing remains difficult because lower-cost Chinese material continues to compete aggressively in downstream industrial markets.

The Metalnomist Commentary

Titanium prices are stable, but the market is not yet strong. The real divide is between standard aerospace titanium, where inventories still weigh on demand, and premium-quality, defence and medical applications, where strategic consumption remains firmer.

China’s Titanium Sponge Exports Double as Global Supply Tightens

China Titanium Sponge

China's titanium sponge exports surged 104% in 1H 2025 to 3,586t. China's titanium sponge exports filled supply gaps from Russia and Ukraine disruptions. China's titanium sponge exports now anchor aerospace-grade feedstock for global mills.

Drivers and supply displacement

War halted Zaporozhe operations and cut output at VSMPO-Avisma and Solikamsk. Consequently, international buyers pivoted to Chinese sponge to secure critical inputs. Demand came from aerospace, medical devices, and mill products manufacturers. Tighter supply outside China supported new contracts and spot lifting.

June slowdown and shifting destinations

However, June exports fell to 446t, down 33% year on year. Shipments also fell 32% from May amid absent US buying. Taiwan received 120t; South Korea 100t; the Netherlands 60t. India took 40t, and Japan purchased 25t during the month.

Meanwhile, US demand remained weak under higher tariffs and softer mill activity. First-half US receipts dropped 80% to 123t. As a result, Chinese supply rebalanced toward Asian and European customers.

The Metalnomist Commentary

We expect contract buyers to hedge with multi-source sponge as tariffs evolve. Watch aerospace backlogs, Russian repairs, and US policy for price direction. Sustained US absence could deepen Asia-centric trade flows into 2026.

China Raises Overseas Titanium Sponge Supply Amid Oversupply Pressure

China Titanium Sponge

Chinese Titanium Sponge Exports Surge in Response to Oversupply

Chinese titanium sponge producers are rapidly increasing exports to manage growing domestic oversupply. China has dominated global titanium sponge production since 2020, driven by aggressive capacity expansion and high revenues. In 2023, China’s top nine producers delivered 247,400t, a 13.5pc rise year-on-year, marking the ninth straight annual increase.

Export Volumes Climb as Global Buyers Shift from Ukraine and Japan

China exported 1,079t of titanium sponge in January–February 2025, up 29pc year-on-year, customs data shows. Demand rose sharply after Ukraine’s Zaporozhe plant shut down and Japanese suppliers diverted output to Europe and the U.S. South Korea, Japan, and the U.S. became China’s top three buyers in 2024, collectively absorbing over 3,800t.

Tariffs and Caution Temper U.S. and Japanese Import Growth

U.S. imports dropped 35pc in early 2025 due to new Trump-era tariffs, despite 2024 volumes surging nearly 8-fold. Japan doubled its imports to 1,162t last year, likely for quality testing and low-cost applications, not aerospace-grade use. Meanwhile, Japanese producers remain dominant domestically with a 65,000 t/yr capacity and cautious optimism about competition.

The Metalnomist Commentary

China’s titanium sponge industry now walks a fine line between growing export momentum and long-term structural oversupply. While quality improvements have opened doors to Japan and the U.S., geopolitical barriers like tariffs and technical certification hurdles will continue to shape the pace of China's global expansion. Still, the supply shift signals a major realignment in the global titanium value chain.

PTC and Odisha Plan Titanium Sponge Facility

PTC Industries

PTC Industries and the Odisha government have signed an MoU to establish an aerospace-grade titanium sponge facility. This project aims to boost India's domestic titanium production.

Strategic Investment to Enhance Titanium Supply

While details on capacity, investment, and timeline are undisclosed, the facility will position PTC as an integrated titanium producer. The Odisha government is providing industrial ecosystem support and infrastructure incentives. This announcement follows PTC's commissioning of a VAR furnace in Lucknow and a supply agreement with AMIC Toho Titanium Metal (ATTM). India, with the third-largest ilmenite reserves, currently lags in titanium sponge production. The country relies on imports to support its growing aerospace sector.

Addressing India's Titanium Production Gap

Currently, India's titanium sponge production is limited to Kerala Minerals & Metals' 500 t/yr facility. This new facility aims to address this gap. For context, the ATTM joint venture in Saudi Arabia, with a 15,600 t/yr capacity, required approximately five years from announcement to commercial production and a $420 million investment.

Enduring Reliance Amid Sanctions: Europe’s Russian Titanium Dilemma

VSMPO Titanium

Introduction: A Supply Chain Unbroken in Wartime

Despite sweeping economic sanctions imposed by the West following Russia’s invasion of Ukraine in February 2022, one supply chain has proved remarkably resilient: Russian titanium sponge. Europe’s quandary over this advanced material—indispensable to aerospace, defense, and medical-device manufacturing—has only deepened.

Russia’s Command of Titanium

Russia ranks among the world’s largest titanium producers. VSMPO-AVISMA, the country’s flagship producer, accounts for 90% of Russia’s titanium output and exports to some 50 countries. The company is estimated to control up to 30% of the global titanium market and nearly half of aerospace-grade supply.

Russia’s dominance rests on abundant raw-material reserves and comparatively low energy costs. Because titanium smelting is energy-intensive, commercial viability depends on cheap power and gas—conditions Russia has historically met.

Airbus A380

Trade that Continues Despite Sanctions

On 7 March 2022, Boeing announced it would halt purchases of Russian titanium used in aircraft manufacturing. Rolls-Royce and Boeing subsequently suspended procurement from VSMPO-AVISMA indefinitely.

Europe, however, charted a different course. Airbus urged the European Union to keep Russian titanium outside future sanctions packages. As Airbus chief executive Guillaume Faury argued, titanium represents a small share of Russia’s total exports, so sanctions would inflict little pain on Moscow while dealing a heavy blow to Europe’s aerospace industry.

Today, Airbus still sources roughly half of its titanium from VSMPO-AVISMA. Boeing, by contrast, once relied on Russia for about one-third of its titanium but has since stopped buying Russian material.

The Limits—and Exceptions—of EU Sanctions

Notably, while the EU has restricted imports of Russian steel and coal, titanium has not been sanctioned. The metal remains a strategic material used in fuselages, turbine blades, satellites, and other critical systems.

Dependence on Russian metals endures in other segments as well. From March to June 2022, combined EU-US imports of Russian aluminum and nickel rose to $1.98 billion—more than 70% above the prior-year period.

Washington and Brussels have generally refrained from designating industrial metals as sanction targets. Europe continues to import large volumes of Russian natural gas, and Russia supplies about 40% of global palladium—vital for semiconductors—implicating everything from automobiles to smartphones.

CBAM

CBAM: A New Variable

The EU’s Carbon Border Adjustment Mechanism (CBAM), introduced in October 2023, adds another layer of complexity. CBAM initially covers cement, electricity, fertilizers, iron and steel, aluminum, hydrogen, and certain downstream products in steel and aluminum. After a transition phase through 2025, full implementation begins in 2026, imposing carbon costs on imports equivalent to those borne by EU producers.

While fertilizers, cement, hydrogen, and non-exported electricity may see limited near-term impact, aluminum stands out as a key target sector. Most exports to the EU beyond steel and aluminum are not yet covered, though the European Commission has signaled possible expansion to high-leakage categories such as organic chemicals and plastics.

Russia is structurally disadvantaged under CBAM. Steel production in Russia, Ukraine, and Türkiye tends to be more carbon-intensive, implying higher embedded-carbon costs at the border.

Ambiguities in Sanctions and Industry’s Dilemma

The United States placed VSMPO-AVISMA on its “military end-user” list, restricting access to advanced technologies, but stopped short of a direct ban on titanium sales—an acknowledgment of global industry’s reliance on the material.

Indeed, during the early stages of the war, VSMPO-AVISMA avoided sweeping US and European sanctions. Although Washington temporarily listed the company in December 2020, the measure was later rescinded.

Recent moves, however, suggest a tightening environment. In April 2024, a joint US-UK action prompted the CME and LME to prohibit trade in newly produced Russian aluminum, copper, and nickel dated after 13 April—an effort widely read as constraining Russia’s influence in metals markets.

Ukraine Titanium Mine

Ukraine: A Viable Alternative?

Against this backdrop, Ukraine has emerged as a potential alternative. Until 2020, the country supplied 90% of Russia’s ilmenite—the feedstock for titanium sponge. With that supply chain severed by war, Ukrainian resources could help challenge Russia’s dominance.

US companies have begun talks with Kyiv on a joint venture anchored by the Zaporizhzhia Titanium-Magnesium Plant (ZTMP). Such partnerships could forge a new titanium hub in Eastern Europe, strengthening Ukraine’s economic footing for decades.

The risks are significant. Ongoing conflict and occupation threaten both Donbas deposits and the ZTMP facilities, which remain exposed to shelling and sabotage.

Aviation’s Growth—and Its Dilemma

The aerospace-titanium market was valued at roughly $100 million in 2022 and is projected to grow at a CAGR exceeding 5% from 2023 to 2032—reflecting the rebound in air travel and a pipeline of commercial aircraft programs.

Despite supply-chain turbulence from war, energy constraints, and labor shortages, passenger traffic continues to recover, lifting titanium demand. In October 2022, Airbus announced plans to deliver more than one aircraft per week to India, persisting with expansion despite engine-supply challenges and domestic carrier capacity constraints—developments that further complicate titanium sourcing.

The Reality of Diversification

Boeing reportedly began diversifying away from Russian titanium after the 2014 annexation of Crimea. Airbus, by contrast, remains heavily reliant on Russian supply.

Globally, China produced around 100,000 t of titanium in 2013—twice the combined output of Russia and Japan at the time—making it the world’s largest producer. Japan ranked third, with Osaka Titanium Technologies standing as the world’s second-largest producer of titanium sponge.

The Metalnomist Commentary: An Unfinished Dilemma

Europe’s struggle over Russian titanium sponge epitomizes the knotty realities of modern supply chains. Between economic sanctions and security imperatives, between industrial competitiveness and moral principle, Europe has yet to find a definitive answer.

With CBAM’s full force arriving in 2026, higher carbon-cost pass-throughs on Russian metals seem likely, intensifying pressure to rewire supply. Yet, as Airbus’s position illustrates, displacing Russian titanium in the short term remains daunting.

The gap between industrial necessity and political sanction endures—witness VSMPO-AVISMA’s August 2025 statement that it stands ready to resume cooperation with Boeing. For now, Europe must navigate this dilemma with prudence: balancing sanction principles, industrial realities, and emergent environmental rules—while accelerating the use of recycled titanium wherever feasible.

Lockheed F-35 Labor Contract Secures Fort Worth Production Continuity

F-35

Lockheed F-35 labor contract has been ratified by unionized employees at the company’s Fort Worth, Texas, assembly site, removing the immediate risk of labor disruption at one of the most important US fighter aircraft production facilities.

Lockheed F-35 labor contract will run for five years through June 2031 and includes annual wage increases, additional vacation benefits and a $6,000 ratification bonus. Workers represented by the International Association and Aerospace Workers approved the agreement on 14 June.

Lockheed F-35 labor contract is strategically important for the aerospace materials supply chain because the F-35 is highly titanium intensive. Each aircraft contains an estimated 5,900lb of titanium, equivalent to roughly 20% of total aircraft weight.

The agreement therefore provides greater production certainty not only for Lockheed Martin, but also for titanium mills, forgers, machinists and component suppliers tied to the F-35 programme.

Labor Stability Protects F-35 Production Schedules

The previous labor agreement was due to expire at midnight on 14 June, creating the possibility of disruption if negotiations failed.

Lockheed and the union reached a tentative agreement on 11 June before workers formally ratified the contract three days later.

The agreement also covers employees at Edwards Air Force Base in California and Patuxent River Naval Air Station in Maryland, extending labor stability beyond the Fort Worth assembly operation.

For Lockheed, avoiding a work stoppage is particularly important because fighter aircraft production depends on highly specialised labour and tightly coordinated supplier schedules.

A prolonged disruption at final assembly could quickly affect upstream suppliers because aerospace components are produced according to programme-specific delivery schedules and qualification requirements.

The five-year agreement gives Lockheed greater visibility over workforce costs and production continuity through the end of the decade.

Titanium Supply Chain Benefits From Production Continuity

The F-35 remains one of the most titanium-intensive major aircraft programmes. Titanium is used extensively because of its high strength-to-weight ratio, corrosion resistance and compatibility with composite structures.

At around 5,900lb of titanium per aircraft, changes in F-35 production volumes can have a meaningful impact on aerospace-grade titanium demand.

The material requirement extends beyond sponge and ingot. F-35 production supports demand for titanium plate, billet, forgings, castings, machined components and scrap recycling across a highly qualified supply chain.

Labor stability at Fort Worth therefore reduces one potential source of demand volatility for titanium suppliers.

The effect also extends to other aerospace materials, including nickel-based superalloys, aluminium and specialty steels used across engines, structures and landing systems.

For suppliers, predictable aircraft production is especially valuable because aerospace capacity cannot be adjusted quickly. Qualification requirements, long lead times and specialised equipment make sudden production changes difficult to absorb.

The Metalnomist Commentary

The labor agreement removes a near-term operational risk from one of the world’s most titanium-intensive defense programmes. For the titanium supply chain, stable F-35 production provides valuable demand visibility through a period of rising defense manufacturing requirements.