ATI Aerospace and Defense Demand Lifts 2026 Guidance

ATI

ATI aerospace and defense demand strengthened in the first quarter, prompting the specialty alloys manufacturer to raise its full-year earnings outlook. The Texas-based company lifted its 2026 adjusted profit guidance by $35mn to $1.01bn-1.06bn.

ATI aerospace and defense demand was strongest in jet engine materials, defence alloys and missile-related products. The company exceeded the high end of its first-quarter forecast by nearly $7mn, reporting adjusted profit of $232mn.

ATI aerospace and defense demand shows that high-performance metals remain central to the aircraft production ramp and defence replenishment cycle. Titanium, nickel-based alloys, isothermal forgings, zirconium and hafnium are all tied to programmes where qualification, lead times and supply reliability matter.

Quarterly profit rose by 20% on the year to nearly $120mn, while revenue increased by 6.2% to almost $1.2bn.

Jet Engine Materials Keep Specialty Alloy Lead Times Tight

Commercial jet engine sales rose by 12% on the year to $472mn, making the segment ATI’s largest product category. The company expects mid-teens growth in jet engine sales this year.

Demand is being driven by original equipment manufacturers and aftermarket service providers. Both need reliable access to specialty alloys and isothermal forgings as engine production and repair activity expand.

This is strategically important because jet engines consume some of the most demanding materials in the aerospace supply chain. Nickel-based superalloys, titanium alloys and premium-quality forgings must meet strict performance standards under heat, stress and fatigue conditions.

ATI is also working to qualify its new electron-beam furnace for premium-quality titanium at its Richland, Washington facility. This material is used in rotor-grade engine parts.

Approval of the furnace would help reduce pressure on ATI’s other premium-quality titanium melting operations. Some lead times for this material are now close to two years.

That lead-time signal matters. Aerospace buyers are not only chasing capacity. They are trying to secure qualified melt routes for materials that cannot be easily substituted.

Commercial airframe sales moved lower in the first quarter, falling by 9.3% to nearly $187mn. Airframers and OEMs continued drawing down internal stocks of raw materials and components.

However, ATI expects full-year airframe sales to grow by mid-to-upper single digits, with demand backloaded into the second half as inventories normalise. This should support stronger sales of standard-quality titanium used in structural aircraft components.

The company also expects much stronger titanium sales growth in 2027, based on long-term order patterns and customer production plans.

Defence Orders Strengthen Zirconium, Hafnium and Missile Materials

Defence sales rose by 9.3% on the year to $139mn in the first quarter. ATI expects full-year defence revenue to rise by low-to-mid teens from 2025 levels.

The company renewed a five-year, $1bn contract supporting the US Naval Nuclear Propulsion Program. This will drive continued demand for specialty alloys containing zirconium and hafnium.

Zirconium and hafnium are strategically important in nuclear and defence supply chains. Their use requires tight quality control, reliable processing and long-term customer qualification.

Missile-related demand also strengthened. ATI said first-quarter missile revenue doubled from a year earlier as contractors increased production and replenished munitions inventories.

The company supplies titanium and nickel products used in structural and propulsion applications for missile programmes, including Tomahawk, Patriot Advanced Capability-3 and Terminal High Altitude Area Defense interceptors.

Nickel-based and specialty alloys remained ATI’s largest revenue source, accounting for 49% of total sales in the quarter. Precision forgings, castings and components accounted for 20%, while titanium and titanium-based alloys represented 17%.

The mix shows ATI’s strategic position. The company is exposed to aerospace engine growth, defence replenishment, naval nuclear programmes and missile production, all of which depend on hard-to-qualify specialty metals.

ATI’s raised guidance therefore reflects more than a cyclical recovery. It points to structural demand for advanced materials across aerospace, defence and energy-security-related programmes.

The Metalnomist Commentary

ATI’s guidance increase confirms that aerospace and defence demand is pushing pressure upstream into qualified melt capacity and specialty alloys. The real bottleneck is not generic metal supply, but premium titanium, nickel alloys, zirconium, hafnium and forgings that meet mission-critical specifications.

Norsk Titanium RPD Technology Targets US Submarine Applications

Norsk Titanium

Norsk Titanium RPD technology is moving deeper into US defense applications after the company secured a $4.2mn contract to develop rapid plasma deposition for maritime and submarine use.

Norsk Titanium RPD technology will be developed over an 18-month period under the Defense Industrial Base Expansion, Development, and Growth Enterprise initiative. The work will focus on qualifying additive-manufactured products for highly critical naval applications.

Norsk Titanium RPD technology is already established around titanium alloys, but the new programme will also expand the process into nickel-based alloys. That broadens the potential market from corrosion-resistant structural components into higher-temperature and more demanding applications.

The programme is strategically important because submarine supply chains require highly qualified materials, long service lives and strict control over metallurgy and manufacturing consistency.

Titanium Additive Manufacturing Fits Maritime Corrosion Requirements

Titanium is especially valuable in marine environments because of its strong corrosion resistance in seawater.

Commercially pure titanium and alloys such as Grade 5 and Grade 7 can provide long-term durability where conventional steels would require greater corrosion protection or maintenance.

This makes titanium attractive for submarine and maritime components exposed to saltwater, pressure and difficult operating conditions.

Additive manufacturing can add another advantage. Near-net-shape production can reduce the amount of expensive titanium that must be machined away from forged or wrought stock.

That can improve material utilisation and shorten lead times for complex components, particularly where conventional manufacturing requires large forgings or extensive machining.

For defense programmes, reducing dependence on long-lead forgings can be strategically valuable. Qualified additive processes could provide an alternative route for components where supply capacity is constrained.

However, qualification remains the critical barrier. Submarine components operate in safety-critical environments, so mechanical properties, fatigue behaviour, defect control and repeatability must be demonstrated before widespread adoption.

Nickel Alloys Could Expand RPD Beyond Structural Titanium

The move into nickel-based alloys could significantly broaden Norsk Titanium's addressable market.

Nickel superalloys are widely used where components must retain strength, corrosion resistance and thermal stability under demanding conditions.

For naval applications, this could create opportunities in propulsion, high-temperature systems and specialised mechanical components alongside titanium structures.

The combination of titanium and nickel alloy capability would also strengthen Norsk Titanium's position as a broader defense manufacturing supplier rather than a single-material additive producer.

The US defense industrial base is increasingly focused on manufacturing resilience, particularly for components dependent on limited forging, casting or machining capacity.

RPD technology could support that objective if it can reduce lead times while meeting military qualification standards.

The longer-term significance therefore lies in process substitution. Norsk is not simply selling additive manufacturing equipment; it is trying to qualify a new production route for materials and components traditionally supplied through conventional metallurgical processes.

The Metalnomist Commentary

Norsk Titanium's submarine programme shows that additive manufacturing is moving into increasingly critical defense applications. If RPD qualifies successfully in both titanium and nickel alloys, the technology could reduce dependence on long-lead forgings and expand flexibility across the naval supply chain.

High-temperature metals and nickel rally reshape global superalloy cost structure

High-temperature metals

Surging demand and constrained supply mean the high-temperature metals and nickel rally is fundamentally reshaping superalloy cost structures. Aircraft engine and industrial gas turbine manufacturers are ordering at record levels just as key refractory metals move sharply higher. As a result, the high-temperature metals and nickel rally is squeezing melters that sit between volatile raw material markets and long-dated OEM contracts.

Rhenium-led cost shock hits second-generation superalloys

Rhenium has become the epicentre of the high-temperature metals and nickel rally despite representing only a small share of alloy weight. Intrinsic values for benchmark single-crystal alloys such as Rene N5 and CMSX-4 have jumped by more than 80pc in a year. This surge reflects rhenium’s critical role in creep strength and fatigue resistance in high-pressure turbine blades. However, rhenium remains a by-product of molybdenum from copper operations, which severely limits flexible supply. Other key elements such as tantalum and hafnium have also rallied, yet their relative contribution to alloy cost is still overshadowed by rhenium in second-generation chemistries.

Producers now face a difficult trade-off between performance and affordability as the high-temperature metals and nickel rally reopens the debate over alloy design. Second-generation alloys with roughly 3pc rhenium, including Rene N5 and CMSX-4, remain the market workhorses because they balance durability with cost. Meanwhile, third-generation alloys with higher rhenium contents remain less widely adopted, as OEMs hesitate to qualify materials whose economics depend on extreme minor-metal prices.

Tight turbine capacity, nickel rally and scrap strategy

Industrial gas turbine demand is amplifying the impact of the high-temperature metals and nickel rally on alloy buyers. MAR-M 247, a key alloy for IGT blisk castings, has seen calculated costs climb alongside hafnium and other minor metals. Lead times for major OEMs such as GE Vernova, Siemens Energy and Mitsubishi Heavy Industries reportedly stretch to around seven years. Commercial aircraft backlogs exceed a decade of production, leaving melt shops reluctant to miss their place in already strained queues.

Nickel’s rally adds a second layer of inflation even in lower rhenium or rhenium-free alloys. Benchmark nickel prices have jumped around 25pc since mid-December, supported by investor flows and policy risk premiums despite an oversupplied refined market. Nickel-based alloys only account for roughly 6pc of nickel demand, yet the price spike is clearly visible in less temperature-critical grades such as Inconel 718. Intrinsic values for Inconel 718 have risen on the back of nickel and niobium, lifting input costs for rings, casings and sheet parts across aerospace and energy applications.

To defend margins, melters are pushing scrap-based strategies as far as OEM specifications allow. High revert utilisation, sometimes up to 70pc of a melt, can partially shield producers from spot price volatility in primary metals. However, strict quality standards often restrict the use of externally sourced scrap, with some OEMs mandating internal revert only. Many melt shops therefore work “hand-to-mouth”, hesitant to lock in long-term tonnages at record prices while suppliers worry about replacing committed units in tightening markets.

The Metalnomist Commentary

The high-temperature metals and nickel rally is exposing how concentrated and opaque minor-metal supply chains remain, particularly for rhenium and tungsten. For investors and OEMs, the key strategic levers will be higher scrap utilisation, deeper recycling partnerships and more flexible alloy qualification pathways. Those who move fastest on revert, substitution and long-term offtakes will be best placed to secure turbine-grade material through the next decade of aerospace and power-generation growth.

ELG Utica Alloys CEO Carsten Becker Resigns After Seven Years

ELG Utica Alloys

COO Nils von Stromberg Steps in as Interim CEO

ELG Utica Alloys, a global leader in specialty metal scrap processing, has announced the resignation of CEO Carsten Becker after seven years in the role. Becker officially stepped down in December 2024 to explore new opportunities outside the company, as confirmed in an official social media statement.

Leadership Transition at ELG Utica Alloys

Following Becker’s departure, Chief Operating Officer (COO) Nils von Stromberg has taken over as interim CEO. The company has not disclosed details regarding the search for a permanent successor or the timeline for appointing a new chief executive officer. This transition marks a significant shift for the organization, which plays a crucial role in the global supply chain for high-performance recycled metals.

ELG Utica Alloys and Aperam’s Market Influence

ELG Utica Alloys, a subsidiary of Aperam, specializes in processing high-value metal scrap, including nickel-based superalloys, titanium, and cobalt alloys. Its parent company, Aperam, is a Luxembourg-based specialty metal producer with a strong global presence in stainless steel and high-performance alloys.

This leadership change occurs amid increasing demand for recycled and high-grade specialty metals across industries such as aerospace, energy, and advanced manufacturing. As businesses prioritize sustainability and supply chain resilience, ELG Utica Alloys remains committed to delivering high-quality metal recycling solutions for its international customer base.

The company has yet to release further information on its long-term leadership strategy. However, its continued focus on innovation, sustainability, and high-performance metal processing will be critical in maintaining its competitive edge in the global market.

SUPER METAL PRICE Launches 'The Metals Grade Atlas' eBook: A Definitive Handbook for the Specialty Metals Industry

eBook: 'The Metals Grade Atlas'

An 815-page authoritative guide to titanium, nickel, and iron alloys sets a new global standard in advanced materials selection.

SUPER METAL PRICE, a global intelligence platform specializing in metals markets, has officially released The Metals Grade Atlas, a comprehensive digital reference for high-performance specialty metals used in modern industries.

A Complete Guidebook for Extreme Industrial Conditions in the 21st Century

This 815-page volume presents a systematic overview of materials engineered to withstand extreme environments, including aerospace, power generation, chemical processing, medical devices, and offshore platforms.

The Metals Grade Atlas provides essential data for materials capable of enduring ultra-high temperatures, corrosion, and mechanical stress—such as jet turbine blades operating above 1000°C, or gas turbines in power plants that function under thermal extremes exceeding 1200°C.

Covering the Full Spectrum of Titanium, Nickel, and Iron Alloys

The publication categorizes cutting-edge alloys into three key material families:

◎ Titanium Alloys – Lightweight and corrosion-resistant innovations

• Core material in aerospace applications for airframes, engine components, and landing gear
• Exceptional strength-to-weight ratio enhances fuel efficiency and payload
• Proven durability in chloride- and H₂S-rich offshore environments
• High biocompatibility and long-term stability for medical implants

◎ Nickel-based Superalloys – Designed to conquer extreme temperatures

• Resilient beyond 1200°C with excellent thermal and mechanical stability
• Ideal for turbine blades, combustors, and disks in power generation systems
• High resistance to creep, oxidation, and thermal cycling in jet engine hot zones
• Key material in high-temperature petrochemical reactors and heat exchangers

◎ Special Iron Alloys – The structural backbone of industrial infrastructure

• High-strength steels for shipbuilding, construction, automotive, and renewable energy
• Covers a wide range from ultra-high-strength to abrasion-resistant grades
• Enhanced fatigue performance and weldability in marine applications
• Delivers both weight reduction and crash safety in automotive structures
• Specialized grades for wind turbine towers and heavy-duty bearings

A Practical Data Library for Industry Professionals

Each alloy in The Metals Grade Atlas includes:

• Chemical composition and mechanical properties
• Corrosion resistance and high-temperature performance
• Fatigue strength and weldability indexes
• Real-world application examples and selection criteria
• Cost-performance considerations to support design decisions

Supporting Engineering Decision-Making

Going beyond material specifications, the book offers a structured framework for material selection in actual engineering practice. It assists professionals in benchmarking, processability assessment, and cost-performance analysis to guide optimal alloy choices.

A Strategic Companion for Industrial Innovation

SUPER METAL PRICE stated, "We sincerely hope this publication becomes a trusted and indispensable reference for design engineers, material scientists, and quality professionals striving to make precise, performance-driven, and economically sound material decisions."

The company further emphasized, "This book aims to serve as a compass for understanding, developing, and applying advanced metals in the pursuit of next-generation industrial innovation."

Global Market Insights and Future Outlook

With net-zero targets and energy transitions accelerating worldwide, demand for high-performance specialty metals is rising sharply. Policies such as the EU’s CBAM and the U.S. IRA have further highlighted the strategic value of specialty alloys. Industry experts have praised The Metals Grade Atlas as a long-awaited professional handbook that offers both comprehensive coverage and practical utility in the field.

Publication Details

• Title: The Metals Grade Atlas (eBook)
• Publisher: SUPER METAL PRICE
• Release Date: June 1, 2025
• Language: English
• File Size: 12.9MB
• Length: 815 pages

Available at: www.supermetalprice.com

About SUPER METAL PRICE

SUPER METAL PRICE is a global intelligence platform delivering in-depth analysis and real-time news on the metal markets. Its coverage spans steel, non-ferrous metals, rare earths, and energy-transition materials, with expert insights into pricing trends, tariffs, trade policies, and technical innovations across major regions including the U.S., Europe, China, and India.

Following The Metals Grade Atlas, the company plans to expand its specialty metals portfolio with future publications, including a Rare Earth Handbook and a Recycling Technology Guide.

Contact

Website: www.supermetalprice.com

eBook Purchase: Visit the digital download page

This press release is based on publicly available information from SUPER METAL PRICE.

ATI Aerospace Machining Expansion Targets Jet Engine Supply Bottlenecks

ATI Alloys

ATI aerospace machining expansion has moved downstream with a new 200,000ft² facility in Chihuahua, Mexico, focused on machining, inspection and qualification of critical jet engine components. The site has been operational since April and marks ATI’s first manufacturing location in Mexico.

ATI aerospace machining expansion strengthens the US specialty alloys producer’s position beyond raw material and forging supply. Nearly half of the new plant is dedicated to machining forged components used in high-pressure engine sections, where nickel-based superalloys are essential because of extreme heat and mechanical loads.

ATI aerospace machining expansion also addresses a persistent aerospace constraint: qualified downstream capacity. Strong demand for new engines and spare parts has increased pressure not only on alloy and forging supply, but also on machining, nondestructive testing and final quality verification.

The Chihuahua location gives ATI access to an established aerospace manufacturing cluster, trained workers and nearby suppliers. Customer qualification is already under way for components serving both existing and next-generation engine platforms.

Nickel Superalloy Machining Becomes a Critical Engine Bottleneck

High-pressure sections of jet engines operate under some of the most demanding conditions in industrial manufacturing. Components must withstand high temperatures, rotational stress, fatigue and repeated thermal cycling.

Nickel-based superalloys are therefore widely used in these engine sections because they retain strength and oxidation resistance at elevated temperatures. But producing the alloy is only one part of the supply chain.

Forged engine components require extensive precision machining before installation. Nickel superalloys are difficult to machine because of their high strength, work hardening and heat resistance, which increase tool wear and processing time.

That makes qualified machining capacity strategically important. Aerospace manufacturers cannot simply move parts to an unapproved supplier when capacity becomes tight because every process must meet strict customer and regulatory requirements.

ATI’s new facility therefore extends the company further into value-added processing. Instead of supplying only specialty alloy or forged material, it can provide more finished components closer to engine assembly.

The remainder of the Chihuahua plant is dedicated to inspection, including nondestructive testing and quality verification. These processes are critical because internal cracks, surface defects or dimensional deviations can make high-value engine components unusable.

Customer Qualification Could Deepen ATI’s Aerospace Integration

ATI said engine manufacturers and other customers are working aggressively to qualify the new facility. That suggests customers are actively looking for additional approved capacity to relieve bottlenecks.

The facility will process components for both legacy and next-generation engine models. This gives ATI exposure to two important demand streams: new aircraft production and the aftermarket replacement cycle.

Legacy engines generate recurring demand for spare components as fleets remain in service. At the same time, newer engine platforms require higher-performance materials and increasingly complex manufacturing routes.

This combination supports long-term demand for nickel superalloys, titanium and other specialty aerospace materials. But supply-chain performance increasingly depends on how quickly those materials can move through forging, machining, heat treatment, inspection and qualification.

ATI’s Mexico investment reflects this shift. Aerospace suppliers are moving closer to integrated component production as customers seek fewer bottlenecks between raw material and finished part.

Financial details and production capacity were not disclosed, so the immediate earnings impact remains unclear. But strategically, the site gives ATI a larger role in one of the highest-value sections of the aerospace materials chain.

The Metalnomist Commentary

ATI’s Chihuahua plant shows that aerospace shortages are moving downstream from alloy supply into machining and qualification. In jet engines, the competitive advantage increasingly belongs to suppliers that can control more of the path from superalloy to finished, approved component.

ATI Sells Precision Rolled Strip Operations to Ulbrich to Refocus on Core Markets

ATI

ATI, a leading specialty alloys producer, has divested its precision rolled strip operations to Ulbrich Stainless Steels and Special Metals, a specialty metals manufacturer. This strategic move aligns with ATI's focus on its core markets in aerospace and defense, enabling the company to prioritize titanium, nickel, and alloyed products in its Specialty Rolled Products segment.

Details of the Divestment

ATI announced the sale of its facilities in New Bedford, Massachusetts, and Remscheid, Germany, to Connecticut-based Ulbrich. The New Bedford facility specializes in producing titanium strip, precision rolled strip, and cold-rolled stainless steel. Meanwhile, the Remscheid service center stocks high-temperature metals, including stainless steels, nickel-based alloys, and titanium.

While the financial terms of the deal remain undisclosed, the transaction is a pivotal part of ATI's streamlining efforts to cater to high-value industries such as aerospace and defense.

Strategic Shift Toward High-Performance Metals

This divestment underscores ATI's commitment to strengthening its portfolio in aerospace and defense by concentrating on advanced materials. By offloading precision rolled strip operations, ATI aims to enhance efficiency and focus on producing high-performance metals tailored to demanding applications.

Ulbrich, known for its expertise in precision metals, is expected to leverage the acquired facilities to expand its market reach and capabilities, particularly in stainless steel and high-temperature alloys.

This strategic realignment by ATI highlights an industry trend where companies streamline operations to bolster their standing in high-growth markets.

ATI Tariff Impact 2025 Expected to Be Minimal as Aerospace Demand and Supply Strategies Offset Risks

ATI

Flexible sourcing, defense exemptions, and surcharges help ATI maintain 2025 earnings guidance

Aerospace and jet engine orders drive resilience despite raw material tariffs on nickel, vanadium, and zirconium

ATI tariff impact 2025 is expected to be limited, as the specialty alloys producer forecasts only a $50 million pre-mitigation earnings hit from recent U.S. trade measures. Despite the new tariffs, the Texas-based firm has reaffirmed its 2025 earnings guidance, leveraging a combination of duty drawbacks, defense exemptions, and pass-through pricing clauses to insulate operations.

Strategic tools and flexible sourcing preserve profitability under new trade conditions

ATI noted that surcharge mechanisms on new orders, effective April 7, and selective tariff exclusions for aerospace-related inputs are already helping to preserve income and control exposure. Key exemptions were granted for materials critical to defense, although nickel scrap, hafnium, vanadium, molybdenum, and zirconium remain tariffed. While some industrial customers have slowed purchases amid uncertainty, ATI’s core aerospace and defense segments remain solid.

Notably, aerospace and defense represent 66% of ATI’s total business. The company is the exclusive source for five of seven nickel-based alloys used in jet engine hot sections and is a top forger of rotating components. As a result, full-year jet engine sales are projected to grow 15–20%, with Q1 sales up 35% to $421 million.

Titanium contracts and capacity expansion support long-term aerospace growth

Though titanium-heavy airframe sales rose modestly by 8.2% due to OEM inventory drawdowns, ATI secured a new five-year, $1 billion supply deal with Airbus for flat-rolled titanium products. The company is also qualifying premium-grade titanium from its new electron beam (EB) furnace in Richland, Washington, targeting critical aerospace applications.

For Q1, ATI reported a 47% profit increase, reaching $97 million, with revenue climbing nearly 10% to over $1.1 billion. These results affirm ATI’s ability to navigate short-term tariff turbulence while capitalizing on long-term demand trends.

The Metalnomist Commentary

The ATI tariff impact 2025 story underscores the value of vertical integration, contract structure, and defense-linked exemptions in managing geopolitical trade risks. ATI’s proactive pricing and sourcing strategy may set a precedent for specialty metals producers facing future tariff regimes.

Stonepeak to Acquire Forgital Group, Expanding Aerospace Components Portfolio

Forgital Group

Stonepeak, a prominent US-based investment firm, has reached an agreement to acquire Forgital Group, an Italy-based aerospace components manufacturer, from Carlyle, another US investment group. This acquisition, which is pending regulatory approvals, is expected to be finalized by the second quarter of 2025. While financial details of the transaction have not been disclosed, the deal marks a significant move for Stonepeak in expanding its presence in the aerospace and defense sectors.

Forgital Group: A Leading Aerospace Component Manufacturer

Forgital Group is known for its expertise in manufacturing seamless rolled rings and assembling fan modules, critical components used in commercial aerospace and defense applications. The company’s products serve as compressor and turbine discs in aircraft engines, which are vital for both performance and safety in modern aviation.

In addition to its aerospace offerings, Forgital serves a wide range of industrial markets, producing components from high-performance materials such as titanium, aluminum, and nickel-based alloys. With nine production facilities located across Italy, France, and the US, Forgital has a well-established footprint in the global manufacturing landscape.

Strategic Acquisition to Strengthen Aerospace Portfolio

The acquisition of Forgital Group fits within Stonepeak’s broader strategy to strengthen its portfolio in high-growth industries, particularly aerospace and defense. By adding Forgital’s specialized manufacturing capabilities, Stonepeak positions itself to capitalize on the increasing demand for advanced aerospace components, driven by both commercial aviation and defense sector needs.

Forgital's focus on high-performance materials, including titanium and nickel alloys, aligns with the growing demand for lightweight yet durable materials in the aerospace industry. These materials are essential for improving fuel efficiency and reducing emissions in aircraft, making them a key area of investment as the industry moves toward more sustainable technologies.

Regulatory Approval and Closing Timeline

The acquisition is still subject to regulatory review, with completion anticipated by the second quarter of 2025. Upon finalizing the deal, Stonepeak will integrate Forgital’s operations into its portfolio, expanding its capabilities in the aerospace components sector. The deal is poised to enhance Stonepeak’s position in a competitive market, which is increasingly driven by technological advancements and the push for more efficient aerospace manufacturing.

Pursuit Aerospace Acquisition Expands Titanium and Inconel Machining Capacity

Leesta Industries

Pursuit Aerospace acquisition of Leesta Industries expands the US aircraft component manufacturer's machining capabilities while strengthening its existing forging operations. The deal also gives Pursuit its first facility in Montreal, one of North America's major aerospace manufacturing hubs.

Pursuit Aerospace acquisition adds Leesta's 38,000ft² facility in Pointe-Claire, Quebec, where the company operates milling, lathe and mill-turn equipment for precision aerospace parts.

Pursuit Aerospace acquisition also expands its exposure to several Pratt & Whitney engine platforms. The combination of forging and machining gives Pursuit greater control over more stages of aerospace component production.

Leesta manufactures engine and landing gear components including bearing housings and actuator assemblies from titanium, stainless steel and Inconel. Financial terms of the transaction were not disclosed.

Titanium and Inconel Machining Strengthens Engine Supply Capability

Leesta's expertise in difficult-to-machine aerospace materials adds strategic value to Pursuit's manufacturing platform. Titanium and nickel-based superalloys require specialised tooling, process control and technical experience.

Titanium combines high strength with relatively low weight and strong corrosion resistance, making it important for aircraft engines, structural parts and landing systems.

Inconel and other nickel-based alloys provide strength and oxidation resistance at high temperatures. These characteristics make them essential for engine components operating under extreme thermal and mechanical loads.

Machining these materials can become a bottleneck even when raw metal is available. Tool wear, heat generation and strict dimensional requirements make aerospace machining significantly more complex than conventional industrial production.

By adding Leesta's capabilities, Pursuit can integrate more machining work with its forging operations and reduce dependence on external subcontractors.

Montreal Acquisition Deepens Pratt & Whitney Supply Chain Position

The Montreal location gives Pursuit access to a dense aerospace manufacturing ecosystem with established engineering talent, suppliers and major aircraft and engine programmes.

Leesta's existing work on Pratt & Whitney platforms strengthens Pursuit's relationship with one of the world's major aircraft engine manufacturers.

This matters because aerospace supply chains rely heavily on qualified suppliers. Once a machining process, component and material route are approved for an engine programme, replacing the supplier can require extensive testing and certification.

The acquisition therefore increases both production capacity and customer relevance. It also positions Pursuit to capture more value from each component by combining forging, machining and finishing capabilities.

For metals suppliers, the transaction reinforces strong demand for qualified titanium and nickel alloy processing. Growth in commercial and defence aerospace requires not only additional raw material, but also sufficient downstream capacity to convert it into flight-ready parts.

The Metalnomist Commentary

Aerospace bottlenecks increasingly sit in qualified machining rather than raw metal availability alone. Pursuit's acquisition strengthens its ability to turn titanium and Inconel into higher-value engine and landing gear components within a major aerospace cluster.

ATI and USW Finalize Six-Year Labor Agreement for Specialty Alloys Division

ATI

ATI has finalized a six-year labor agreement with the United Steelworkers (USW), securing workforce stability across its specialty rolled products division. The deal, covering nearly 1,000 union employees, applies to six ATI facilities in Pennsylvania and one in New York. This development strengthens labor continuity at a time of increased demand for high-performance alloys used in aerospace, defense, and energy sectors.

The new ATI labor agreement ensures uninterrupted production of stainless steel, nickel alloys, cobalt alloys, and titanium-based products. ATI produces these materials in various forms, including sheet, strip, and plate, all critical for supply chains that depend on corrosion resistance, high-temperature strength, and specialty metallurgical performance. The agreement also reflects mutual confidence between ATI and the USW after past labor disputes.

Labor Stability Strengthens ATI’s Specialty Metals Output

The ATI labor agreement stabilizes operations across key manufacturing sites that serve aerospace, medical, and energy customers. These sectors require reliable supply of specialty alloys like nickel superalloys and titanium plate, which are often constrained by both technical complexity and production scale. Labor stability allows ATI to continue executing its strategy of focusing on high-margin, differentiated materials.

ATI’s recent capacity investments in its specialty rolled products segment suggest growing customer demand for advanced materials. The secured labor contract now reduces the risk of production disruptions and supports ATI’s long-term service commitments to strategic customers.

Titanium and Nickel Alloy Markets Benefit from Secure Supply Chain

By locking in a long-term labor agreement, ATI improves predictability in the nickel alloy and titanium product markets, where delays or shortages can significantly impact OEMs. As supply chain risk remains a top concern for defense and aerospace contractors, ATI's ability to maintain a stable, union-backed workforce adds resilience to its role in the specialty metals ecosystem.

This move also enhances ATI’s positioning in government contracts and specialty component supply, where operational reliability and labor compliance are prerequisites.

The Metalnomist Commentary

The new ATI labor agreement marks a strategic win for North American specialty metals stability. At a time of geopolitical supply risk and defense material bottlenecks, labor certainty helps ATI meet growing downstream demand for high-performance alloys.

Safran Engine Machining Capacity Expansion Strengthens Aerospace and Defence Supply Chains

Safran Engine

Safran engine machining capacity expansion will strengthen Europe’s role in high-value aerospace manufacturing. Safran Aircraft Engines will invest €70mn at its Le Creusot site in France. The project will add production lines for complex rotating parts used in the M88 and GE90 engines. As a result, Safran engine machining capacity expansion supports both commercial aerospace and defence demand.

The investment matters because rotating parts sit at the core of engine performance and reliability. These components typically include compressor and turbine disks and blades. They are made from titanium alloys or nickel-based alloys depending on temperature requirements. Therefore, the project also matters for strategic alloy supply chains.

Safran’s timeline shows that this is a phased industrial buildout. Machining for the M88 and GE90 will start at the existing Le Creusot facility this year. Production will later shift into the expanded area once it becomes operational in 2029. Consequently, Safran engine machining capacity expansion begins delivering capability before the full project is completed.

Aerospace Rotating Parts Capacity Gains Strategic Importance

Aerospace rotating parts capacity is becoming more important as engine programs scale across civil and military markets. The M88 powers France’s Dassault Rafale fighter jet. Meanwhile, the GE90 powers Boeing’s 777 widebody aircraft. Therefore, the same expansion supports two very different but equally strategic aerospace segments.

This dual-market exposure strengthens the business case. Defence programs usually value security of supply and machining precision. Commercial aerospace programs require volume, consistency, and tight delivery discipline. As a result, the Le Creusot expansion gives Safran a stronger position across both industrial environments.

The project also fits a wider aerospace reality. Engine makers now need deeper control over critical components, not just final assembly. Machining capacity for advanced rotating parts cannot be expanded quickly or easily. Consequently, Safran engine machining capacity expansion reflects long-term confidence in future engine demand.

M88 Engine Supply Chain and GE90 Engine Components Get a Capacity Boost

M88 engine supply chain resilience should improve as new machining lines come online. The Rafale remains one of Europe’s most important fighter platforms. Any increase in component manufacturing capacity supports greater defence readiness and industrial autonomy. Therefore, this project has significance beyond pure factory expansion.

GE90 engine components also gain from the new investment. The GE90 remains a key powerplant for long-haul widebody aviation through the Boeing 777 family. Safran’s role in machining these parts reinforces how global aerospace supply chains still depend on specialised industrial nodes. Meanwhile, Le Creusot becomes more important inside that network.

The site’s existing production base adds further credibility to the project. Le Creusot already produces low-pressure turbine disks for the Leap and CFM56 programs. Those engines power core narrowbody fleets at Airbus and Boeing. As a result, Safran is expanding from an established industrial platform rather than starting from scratch.

The Metalnomist Commentary

This investment shows that aerospace competitiveness still depends on specialised manufacturing depth. Safran is not just adding floor space. It is strengthening a strategic production layer tied to titanium, nickel alloys, defence readiness, and widebody engine reliability.

NAS Stainless Mill Expansion Strengthens Acerinox’s US Growth Strategy

Acerinox

NAS stainless mill expansion has started operations, giving Acerinox a stronger production base in the US stainless steel market. The Spanish stainless steel and high-performance alloys producer said the expansion at North American Stainless in Kentucky began at the start of 2026.

NAS stainless mill expansion will add 308,000 short tons per year of capacity. This lifts the mill’s annual run rate to 1.85mn short tons from its previous 1.54mn st/yr base.

NAS stainless mill expansion had been delayed from the end of 2025 because of crane repair and revamp work at the site. The start-up now gives Acerinox more exposure to a US market it sees as more stable and attractive than Europe.

The project reinforces Acerinox’s investment preference. The company said US finished stainless base prices have been more stable than European prices, which remain affected by severe swings and the historic lows reached in mid-2023.

US Stainless Market Shows Signs of Recovery

US apparent finished stainless demand fell by 11% year on year in the first quarter. However, demand improved by 5% from the previous quarter, supporting Acerinox’s view that US orders have recently strengthened.

US stainless inventories are now 7% below the historical average and appear stabilised. Deliveries have also grown in recent months, suggesting that the market may be moving beyond the weakest part of the cycle.

North American Stainless operated at an 80% utilisation rate in the quarter, excluding the new expansion. That implies quarterly stainless production of around 308,000st.

The expansion gives Acerinox more leverage if US demand continues to recover. Higher capacity at NAS can support customers in appliances, construction, automotive, energy, industrial equipment and infrastructure applications.

The US market also offers a more attractive pricing environment for Acerinox. Compared with Europe, where stainless producers have faced deeper price volatility, the US provides a clearer platform for investment and margin stability.

Aerospace and Gas Turbines Support High-Performance Alloy Outlook

Acerinox’s high-performance alloys division faced weaker demand from oil and gas and chemical processing customers. Geopolitical uncertainty has slowed investment in those sectors, reducing near-term demand for specialty alloys.

However, the company expects stronger aerospace demand to support Haynes International, a key part of its high-performance alloys business. Aerospace remains an important market for nickel-based and specialty alloys used in engines, structures and high-temperature components.

Industrial gas turbines are another potential growth driver. Demand from AI data centres could support turbine investment as power infrastructure becomes a bottleneck for digital expansion.

This matters because AI data centres require reliable electricity, backup generation and grid reinforcement. That can increase demand for high-temperature alloys used in turbine blades, combustion systems and other demanding energy equipment.

Acerinox’s strategy now has two clear pillars. It is expanding stainless capacity in the US through NAS while positioning high-performance alloys around aerospace and energy infrastructure growth.

The Metalnomist Commentary

Acerinox is using the US market as its growth anchor because stainless pricing and demand visibility remain stronger than in Europe. The NAS expansion also shows how specialty metals producers are aligning investment with aerospace, data-centre power demand and more resilient regional markets.

Westbrook Energy Group Rebrands as OneWest: A Strategic Move to Strengthen Forging Operations

Westbrook Energy Group

In a significant shift for the forging industry, Westbrook Energy Group has officially rebranded as OneWest. This move consolidates the company’s various acquisitions into a more unified identity, signaling the group’s ambition to strengthen its position in new markets. The rebrand integrates key operations, including Forge USA, Viking Iron Works, and Western of Texas, under a new umbrella, OneWest Manufacturing Partners. However, Westbrook Manufacturing, Federal Flange, and Forged Components will remain separate brands, continuing their individual operations.

Streamlining Operations Under OneWest Manufacturing Partners

OneWest’s rebrand reflects the company’s strategic decision to unify its core operations while retaining individual brands where appropriate. Viking Iron Works, located in Poughkeepsie, New York, manufactures custom open die forgings for aerospace and industrial markets. With a capacity of up to 2,600 pounds, the company also provides heat treating, machining, and testing services. Viking handles a diverse range of materials, including carbon and alloy steels, as well as titanium grades, to produce seamless rings, disks, and bars.

Forge USA, based in Houston, Texas, focuses on producing open die forgings ranging from 1,000 to 55,000 pounds for similar industries. In addition to heat treating, Forge USA specializes in carbon, alloy, and stainless steels. The company plays a vital role in meeting the growing demands of various industrial sectors.

Western of Texas, situated in Kountze, Texas, specializes in flanges for oil and gas, petrochemical, and mining industries. The company’s expertise lies in producing custom forgings, including rings, disks, and blocks, weighing up to 55,000 pounds. Western of Texas works with stainless steel, nickel-based alloys, and low-temperature alloys to serve its diverse clientele.

No Disruption to Operations or Customer Commitments

Despite the integration of these key operations, OneWest emphasized that the restructuring will not disrupt ongoing operations or affect customer commitments. This strategic move aims to enhance the company’s ability to serve its clients more efficiently while solidifying its presence in key markets.

Indonesia Metals Investment Risk Rises as Policy Shifts Cloud Downstreaming

Indonesia Nickel mining

Indonesia metals investment faces growing uncertainty as frequent policy changes test foreign investor confidence in the country’s mining and processing sector. Jakarta’s latest move to route key commodity exports through a new state-owned enterprise adds another layer of complexity to an already policy-heavy operating environment.

Indonesia metals investment has been supported for years by the country’s downstreaming strategy, especially in nickel. However, investors are now watching whether sudden changes in royalties, export levies, price floors, export proceeds rules and RKAB approvals could weaken the economics of new projects.

Indonesia metals investment remains strategically important because the country dominates global nickel supply and is attracting major aluminium, battery, ferro-alloy and electric vehicle-related projects. But policy direction and policy predictability are not the same thing.

The government’s natural resource strategy is clear. It wants tighter export control, higher state revenue, more domestic value addition and greater retention of foreign exchange. The main concern is how quickly and broadly those rules are implemented.

DSI Export Rule Adds New Uncertainty to Nickel Downstreaming

The planned use of Danantara Sumberdaya Indonesia as a state export channel is the clearest sign of Jakarta’s tightening control over commodity flows. The policy initially targets palm oil, coal and ferro-alloys, but nickel market participants expect broader implications.

Nickel pig iron is likely to be affected because it is a ferro-alloy. That matters because Indonesia’s nickel growth has been built around NPI, stainless steel, nickel matte and battery-material processing.

A centralised export model could reshape how contracts, pricing and payments are handled. If DSI becomes the sole counterparty for overseas buyers, private producers and traders may lose commercial flexibility.

The policy follows several other changes. Indonesia has revised government-mandated price floors, required export proceeds to remain in domestic banks for at least 12 months, adjusted royalty rates, introduced export levy plans and modified the RKAB application process.

These measures all fit Jakarta’s broader resource nationalism agenda. But rapid revisions make it harder for companies to model long-term returns.

Nickel producers have already faced uncertainty over royalty and export duty proposals. The government announced planned changes in April, then postponed them in May before the intended June start date.

This pattern may show that officials are willing to listen to industry feedback. But it also suggests that policy design and communication remain incomplete before major measures are announced.

The risk is that investors begin pricing Indonesia as a less predictable jurisdiction. That could slow downstreaming projects, especially those requiring large capital commitments, long payback periods and imported technology.

Several battery and nickel projects have already faced delays from feedstock constraints, regulatory approvals or weaker market conditions. These include projects linked to Chengtun, Hanrui and LG Energy Solution.

Some operations have also cut or halted production because of delayed or insufficient RKAB approvals. This shows how permitting and quota decisions can directly affect physical output.

Aluminium and Manganese Projects Face Spillover Risk

The market’s immediate focus is nickel, but the risk is wider. If the DSI model expands across more strategic commodities, aluminium and manganese investors could also face new pricing and export constraints.

Chinese aluminium producers have been increasing overseas investment in Indonesia since China imposed a 45mn t/yr cap on domestic primary aluminium capacity. Indonesia offers power access, industrial park infrastructure and proximity to Asian growth markets.

Tsingshan is building an 800,000 t/yr aluminium smelter in Indonesia. Nanshan Aluminium plans to expand its Bintan Industrial Park facility to 500,000 t/yr, while Hua Chin Aluminum Indonesia commissioned a 500,000 t/yr smelter in 2025.

Some Chinese companies are also considering downstream aluminium processing projects in Indonesia. These investments would move the country beyond smelting and into fabricated products.

But discounted sales from Chinese-invested Indonesian smelters could become harder if aluminium exports are eventually routed through DSI. A state-controlled export platform may not allow the same commercial discounting that buyers currently use.

That would raise costs for Chinese buyers and could change the economics of Indonesia-based aluminium supply chains. It could also affect trade flows if producers lose flexibility in pricing and contract structures.

Manganese may also be exposed. Tsingshan has invested in Indonesian manganese production, with six lines and combined capacity of 100,000 t/yr.

The broader lesson is that Indonesia’s downstreaming success depends on credibility as well as control. Investors can adapt to higher royalties, stricter export rules or local processing requirements if implementation is clear and stable.

Uncertainty is more damaging than regulation itself. If companies cannot predict which products will be covered, how prices will be set or when rules will take effect, they may delay capital spending.

Indonesia still has enormous strategic leverage in nickel and growing relevance in aluminium, manganese and battery materials. But maintaining that position will require policy discipline, transparent consultation and practical implementation.

The Metalnomist Commentary

Indonesia is not retreating from downstreaming; it is tightening state control over the value chain. The danger is that too many rapid policy shifts could weaken the investment confidence needed to build the very processing base Jakarta wants to protect.

Safran Forging Press Expansion Strengthens France’s Jet Engine Supply Chain

Safran, Forging

Safran forging press investment in Gennevilliers will expand the French engine manufacturer’s capacity to produce large, high-performance aerospace components. The company plans to install a 30,000t hydraulic press that is expected to become operational in 2029.

The €150mn press will be able to produce 14,000 parts a year at full capacity. It will support higher output of the CFM International LEAP engine, which Safran jointly manufactures with GE Aerospace.

Safran forging press expansion also supports military engine supply chains. The new equipment will help produce parts for engines used in the Rafale, Mirage and A400M aircraft, as well as high-thrust GE engines where Safran supplies high-pressure and low-pressure compressors.

The investment shows how aerospace manufacturers are preparing for sustained engine demand. Airbus and Boeing are both trying to raise production rates for the A320neo Family and 737 MAX, increasing pressure on qualified forging, casting, machining and superalloy supply chains.

High-Tonnage Forging Capacity Targets Future Engine Programmes

The new Safran forging press will give the company more capability to manufacture large engine parts. This is important because next-generation civil aircraft engines are expected to require larger, more complex and more demanding forged components.

Large hydraulic presses are strategic assets in aerospace manufacturing. They allow producers to shape high-strength alloys under controlled conditions, improving structural integrity, fatigue performance and reliability in critical rotating and static engine parts.

The press will also reduce dependence on constrained external forging capacity. Aerospace supply chains have faced recurring bottlenecks in qualified forgings, castings, titanium products, nickel alloy parts and precision-machined components.

For Safran, adding high-tonnage forging capacity supports both current programmes and future engine platforms. The investment strengthens control over key manufacturing steps at a time when engine makers are trying to improve delivery reliability.

Nickel Superalloys and Titanium Remain Critical Engine Materials

Safran’s investment has direct implications for high-performance metals. Nickel-based superalloys are essential for turbine forgings because they retain strength, creep resistance and oxidation resistance at extreme temperatures.

These materials are used in the hottest sections of jet engines, where ordinary alloys cannot survive. As engine efficiency targets rise, demand for advanced nickel superalloy processing remains strategically important.

Titanium is also critical in lower-temperature engine sections, including low-pressure compressors. Its high strength-to-weight ratio and corrosion resistance make it essential for aerospace systems where weight reduction and mechanical performance matter together.

The Gennevilliers project follows Safran’s broader capacity buildout. The company is investing in a new turbine casting facility in La Janais, Rennes, scheduled for commissioning in 2027, and has committed €70mn to expand complex rotating part capacity at Le Creusot by 2029.

Together, these investments point to a coordinated engine materials strategy. Safran is strengthening forging, casting and rotating component capacity to support civil and military aerospace demand through the next production cycle.

The Metalnomist Commentary

Safran’s 30,000t press shows that aerospace competitiveness increasingly depends on control of qualified materials processing capacity. Nickel superalloy and titanium supply will remain critical as engine makers race to meet higher build rates without sacrificing reliability.

Brazil Flight Demand Hits New May Record as Domestic and International Traffic Grow

Brazil's flight

Brazil flight demand continued to expand in May, with domestic and international airlines carrying a combined 10.6mn passengers. The result marked Brazil’s fifth monthly passenger record this year and reinforced the strength of one of Latin America’s largest aviation markets.

Brazil flight demand rose across both domestic and international routes. Domestic airlines transported 8.3mn passengers, up 1.9% from May 2025 and the highest May volume in Brazilian aviation history.

Brazil flight demand measured by revenue passenger kilometres also increased by 2.5% year on year, while available seat kilometres rose by 2.8%. The figures show airlines are adding capacity broadly in line with passenger growth.

The trend is relevant beyond airlines. Sustained traffic growth supports aircraft utilisation, fleet expansion, maintenance demand and longer-term consumption of aerospace materials including aluminium, titanium and nickel-based alloys.

Domestic Traffic Supports Fleet and Maintenance Demand

Latam’s Brazilian subsidiary carried 3.3mn domestic passengers in May, up 5.3% from a year earlier. Its domestic market share increased to almost 40% from 38.5% in May 2025.

Gol held 31.5% of the domestic market, up from 30.4%, while Azul’s share declined to 28.7% from 31%. This shift shows that passenger growth is also reshaping competition among Brazil’s leading carriers.

Rising passenger volumes increase aircraft utilisation, which supports demand for maintenance, repair and overhaul services. Higher utilisation also accelerates component replacement cycles across engines, landing gear, structures and cabin systems.

For aerospace materials suppliers, this matters because growing flight activity supports recurring demand beyond new aircraft production. Titanium, aluminium, specialty steels and nickel superalloys are consumed through both original equipment manufacturing and aftermarket maintenance.

Brazil also has strategic significance because of Embraer’s domestic manufacturing base. Strong local aviation demand can support a broader aerospace ecosystem across aircraft production, components, maintenance and engineering services.

International Growth Adds to Brazil’s Aviation Momentum

International passenger traffic reached 2.2mn in May, up 4.8% from a year earlier and the highest volume recorded for the month.

International flight demand rose by 4.4% year on year, while capacity increased by 3.5%. Demand therefore grew faster than supply, suggesting firm utilisation of international routes.

Latam accounted for 21.8% of Brazil’s international flight demand and increased its international traffic by 15.7%. Tap followed with a 9.5% share, while Azul held 4.8%.

The expansion of international traffic strengthens Brazil’s role as a regional aviation hub. It also supports widebody aircraft utilisation, international maintenance networks and airport infrastructure investment.

For metals markets, aviation growth is important because aircraft manufacturing remains one of the highest-value demand sectors for titanium and nickel superalloys. Strong passenger traffic ultimately supports fleet replacement and expansion when airlines maintain confidence in future demand.

Brazil’s repeated passenger records therefore offer a positive signal for the wider aerospace supply chain. The immediate effect is stronger aircraft utilisation, while the longer-term implication is greater pressure for fleet capacity, maintenance and new aircraft deliveries.

The Metalnomist Commentary

Brazil’s aviation growth is becoming an industrial signal as well as a transport story. Sustained passenger demand should support aircraft utilisation, MRO activity and longer-term aerospace metals consumption across Latin America.

Molymet Maritime House Rhenium Recycling JV Targets Aerospace Supply Growth

Molymet

The rhenium recycling JV between Molymet and Maritime House signals a strategic response to tightening aerospace material demand. The two companies signed an MoU for a planned 50:50 partnership focused on recycling rhenium-bearing materials. The JV aims to produce ammonium perrhenate, rhenium metal, pellets, and powder. As a result, the rhenium recycling JV could strengthen western supply security in a market under growing pressure.

This move matters because rhenium remains one of the most critical specialty metals in aerospace alloys. The metal is not replaceable in several nickel-based superalloys used for turbine blades. Demand from western aerospace manufacturers remains firm, while Chinese import demand for ammonium perrhenate is also supporting the market. Therefore, the rhenium recycling JV enters the market at a time of elevated strategic importance.

The structure of the plan also reflects practical execution. The partners intend to use existing facilities in Chile or Canada first. They will later assess whether a dedicated North American processing plant is commercially justified. Consequently, the rhenium recycling JV begins with flexibility while preserving a pathway to larger regional capacity.

Aerospace Rhenium Demand Is Raising the Value of Recycling

Aerospace rhenium demand is making recycling more important than ever. Engine makers continue to require high-performance superalloys for aircraft engines and industrial gas turbines. That keeps demand resilient even when broader industrial markets weaken. Meanwhile, rhenium prices have reached their highest levels in more than a decade.

That price environment is increasing the value of recycled feedstocks. Rhenium-bearing materials include nickel-based superalloy scrap and binary alloy scrap. These streams offer an alternative source of metal in a market where primary supply remains limited. Therefore, recycling is becoming a more strategic pillar rather than a secondary source.

Molymet and Maritime House also bring strong positioning to this effort. Molymet is the world’s largest primary rhenium producer. Maritime House is the world’s largest recycler of rhenium-containing materials. As a result, the partnership combines primary market scale with recycling expertise in a way few competitors can match.

Ammonium Perrhenate Supply Could Gain a Stronger North American Base

Ammonium perrhenate supply is one of the most important commercial outcomes of this partnership. APR is a critical intermediate product in the rhenium value chain. A more reliable recycled APR stream could support aerospace customers facing tighter procurement conditions. Consequently, the JV could improve both supply diversity and supply resilience.

The North American angle also deserves attention. The partners said they may evaluate a new regional processing facility if feed volumes exceed existing capacity. That would align with broader efforts to localize strategic material processing closer to end users. Therefore, the rhenium recycling JV could evolve from a recycling agreement into a more significant North American supply platform.

The decision to work with original equipment manufacturers also adds commercial depth. The JV plans to offer both recycling and primary supply solutions. That model could make procurement easier for aerospace customers seeking closed-loop or dual-source strategies. As a result, the partnership may gain relevance beyond simple metal conversion.

The Metalnomist Commentary

This deal stands out because it links recycling, primary production, and aerospace demand in one strategic framework. Rhenium remains a small-volume metal, but it carries outsized importance in high-performance superalloys. If this JV scales successfully, it could become one of the more important specialty metals partnerships in the western aerospace supply chain.

Titanium Exempted from US Tariffs: Aerospace Industry Impact Remains Unclear

Titanium

New US Tariff Exemptions for Titanium Could Affect the Aerospace Supply Chain

On April 2, 2025, US President Donald Trump announced new tariffs on several foreign imports, including an exemption for titanium, titanium scrap, and ferro-titanium. While the exemption helps protect titanium trade, the broader implications for the aerospace industry remain uncertain.

Titanium Exemption and Its Effects

The US tariffs announced include a list of exemptions, with titanium in its various forms being spared. However, other metals like hafnium, molybdenum, vanadium, nickel scrap, and aluminum scrap were not exempted. The new tariff scheme does not affect pre-existing duties on Chinese titanium products, including a 20% duty on titanium products from China, which has been in place since March 4, 2025. Despite the exemption for certain forms of titanium, Chinese titanium sponge imports will still be subject to a 60% duty, which remains unchanged.

Additionally, imports of unwrought titanium from Japan, Kazakhstan, and Saudi Arabia will still face a 15% tariff, though efforts to remove this tariff for sponge imports are underway. For US titanium scrap imports, particularly from the EU and UK, which make up over half of the US intake, the tariff exemption is crucial. Without it, US scrap dealers, processors, and consumers would face substantial challenges, as the US does not produce enough vacuum-grade titanium scrap domestically to meet demand.

Aerospace Industry and Supply Chain Impact

While the titanium exemption provides relief for many manufacturers, the broader impact of the tariffs on the aerospace industry is still unclear. Aerospace manufacturers are uncertain about the tariff's effects on finished parts, components, and engines, particularly regarding supply chains that involve cross-border production of engine parts like the Leap-1A and Leap-1B engines for the A320neo and Boeing 737 Max.

Canada and Mexico were excluded from the new US tariffs, alleviating concerns for companies like Bombardier, Airbus, RTX, and Heroux-Devtek, which operate in those regions. Still, some titanium producers believe the situation could change rapidly, as it is difficult to define the boundaries between parts made from titanium and assembled components that use other materials, such as nickel-based alloys or aluminum.

China’s 34% Tariff on US Exports

In response to US tariffs, China has imposed a 34% tariff on all US imports, which will affect titanium imports from the US. Despite importing limited amounts of titanium from the US, China still relies on US imports for critical aerospace components, including parts for its C919 aircraft. The C919 uses the CFM Leap-1C engine, which is assembled in both the US and France.