Moil Manganese Ore Prices Fall as Indian Steel Demand Weakens

Moil, Manganese Ore

Moil manganese ore prices have been cut by 4% for May as weak downstream steel demand and sluggish export bookings pressure India’s manganese market. The state-owned producer reduced prices across ferro-grade ore, silico-grade ore and fines.

Moil manganese ore prices for ferro-grade material with manganese content of 44% and above, as well as below-44% material, were lowered by 4% from April levels. The cut follows a sharp 17.5% increase in April for ore below 44% manganese content.

Moil manganese ore prices for 25% and 30% silico-grade ore and fines were also reduced by 4% for May. The move reflects a softer market environment in which domestic buyers are cautious and export opportunities remain limited.

The price cut highlights a wider imbalance in India’s manganese ore chain. Lower export demand has pushed more material into the domestic market, creating surplus supply across major trading hubs.

Weak Steel Demand Pressures Ferro-Grade Ore

Ferro-grade manganese ore demand remains tied closely to steel and ferro-alloy production. When steel demand weakens, alloy producers reduce feedstock buying and ore prices come under pressure.

India’s downstream steel market has been sluggish, limiting demand for manganese alloys and the ore used to produce them. This has made buyers more cautious about restocking, especially after the April price increase.

The 4% reduction is therefore a market-clearing move. Moil is adjusting prices to reflect weaker consumer appetite and rising domestic availability.

Export weakness has added further pressure. Reduced overseas bookings mean more ore is staying inside India, increasing competition among suppliers and traders.

This domestic oversupply is especially important for ferro-grade ore. Alloy producers can delay purchases when they expect further weakness, which slows market activity and reinforces downward pressure.

Higher Output Adds to Domestic Supply Overhang

Moil’s production has continued to rise despite weaker demand. The company produced around 164,000t of manganese ore in March 2026, up from 159,000t a year earlier.

Full-year output for April 2025-March 2026 reached 1.9mn t, compared with 1.8mn t in the previous fiscal year. This higher supply has entered a market already facing softer domestic and export demand.

The result is a supply overhang across key trading hubs. Even if production growth is modest, weaker buying can quickly create surplus conditions in the manganese ore market.

For alloy producers, lower ore prices may ease cost pressure. But the benefit depends on whether ferro-manganese and silico-manganese demand recovers enough to support production margins.

For Moil, the challenge is balancing output growth with market absorption. Higher production supports volume targets, but weak demand forces price adjustments when inventories rise.

The May price cut therefore sends a clear signal. India’s manganese ore market needs stronger steel and alloy demand before pricing power can return.

The Metalnomist Commentary

Moil’s price cut shows that India’s manganese market is being driven by demand weakness, not raw material scarcity. Until steel and export bookings improve, higher mine output will continue to weigh on ore pricing.